Pinned Repositories
AsyncHTTPRequest_Generic
Simple Async HTTP Request library, supporting GET, POST, PUT, PATCH, DELETE and HEAD, on top of AsyncTCP libraries, such as AsyncTCP, ESPAsyncTCP, AsyncTCP_STM32, etc.. for ESP32 (including ESP32_S2, ESP32_S3 and ESP32_C3), WT32_ETH01 (ESP32 + LAN8720), ESP8266 (WiFi or W5x00) and currently STM32 with built-in LAN8742A Ethernet.
ESP32TimerInterrupt
This library enables you to use Interrupt from Hardware Timers on an ESP32-based board. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.
ESP8266TimerInterrupt
This library enables you to use Interrupt from Hardware Timers on an ESP8266-based board. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.
ESP_WiFiManager
This is an ESP32 / ESP8266 WiFi Connection Manager with fallback web configuration portal. Use this library for configuring ESP32 (including ESP32-S2 and ESP32-C3), ESP8266 modules' WiFi, etc. Credentials at runtime. You can also specify static DNS servers, personalized HostName, fixed or random AP WiFi channel. With examples supporting ArduinoJson
ESPAsync_WiFiManager
This is an ESP32 (including ESP32-S2 and ESP32-C3) / ESP8266 WiFi Connection Manager, using ESPAsyncWebServer, with fallback web configuration portal. Use this library for configuring ESP32, ESP8266 modules' WiFi, etc. Credentials at runtime. You can also specify static DNS servers, personalized HostName, fixed or random AP WiFi channel. With examples supporting ArduinoJson 6.0.0+ as well as 5.13.5- . Using AsyncDNSServer instead of DNSServer now.
EthernetWebServer
This is simple yet complete WebServer library for AVR, AVR Dx, Portenta_H7, Teensy, SAM DUE, SAMD21/SAMD51, nRF52, STM32, RP2040-based, etc. boards running Ethernet shields. The functions are similar and compatible to ESP8266/ESP32 WebServer libraries to make life much easier to port sketches from ESP8266/ESP32. Coexisting now with `ESP32 WebServer` and `ESP8266 ESP8266WebServer` libraries. Ethernet_Generic library is used as default for W5x00 with custom SPI
EthernetWebServer_STM32
This is simple yet complete WebServer library for STM32 boards running built-in Ethernet LAN8742A (Nucleo-144, Discovery), ENC28J60 or W5x00 Ethernet shields. The functions are similar and compatible to ESP8266/ESP32 WebServer libraries to make life much easier to port sketches from ESP8266/ESP32. Ethernet_Generic library is used as default for W5x00. Now W5x00 can use any custom hardware / software SPI
TimerInterrupt
This library enables you to use Interrupt from Hardware Timers on an Arduino, such as Nano, UNO, Mega, etc. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.
WebSockets_Generic
WebSocket / Socket.IO Server and Client for Arduino based on RFC6455. Now supporting Adafruit nRF52, Portenta_H7, STM32F/L/H/G/WB/MP1, Teensy, SAM DUE, SAMD21, SAMD51, Arduino SAMD21 (Nano 33 IoT), MKR1000 / MKR1010WiFi, RP2040-based boards using WiFi101, WiFiNINA, WiFi, Ethernet, WT32_ETH01, Teensy 4.1 NativeEthernet/QNEthernet or Portenta_H7 WiFi/Ethernet, etc. so that those boards can be voice-controlled by Alexa. Now supporting websocket only mode for Socket.IO. Ethernet_Generic library is used as default for W5x00
WiFiWebServer
This is simple yet complete WebServer library for AVR, Portenta_H7, Teensy, SAM DUE, SAMD, STM32, RP2040-based, etc. boards running WiFi modules/shields (WiFiNINA, CYW43439, U-Blox W101, W102, etc.). The functions are similar and compatible to ESP8266/ESP32 WebServer libraries to make life much easier to port sketches from ESP8266/ESP32. Now using WiFiMulti_Generic library
khoih-prog's Repositories
khoih-prog/ESP_WiFiManager
This is an ESP32 / ESP8266 WiFi Connection Manager with fallback web configuration portal. Use this library for configuring ESP32 (including ESP32-S2 and ESP32-C3), ESP8266 modules' WiFi, etc. Credentials at runtime. You can also specify static DNS servers, personalized HostName, fixed or random AP WiFi channel. With examples supporting ArduinoJson
khoih-prog/ESP32TimerInterrupt
This library enables you to use Interrupt from Hardware Timers on an ESP32-based board. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.
khoih-prog/ESP8266TimerInterrupt
This library enables you to use Interrupt from Hardware Timers on an ESP8266-based board. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.
khoih-prog/WebSockets_Generic
WebSocket / Socket.IO Server and Client for Arduino based on RFC6455. Now supporting Adafruit nRF52, Portenta_H7, STM32F/L/H/G/WB/MP1, Teensy, SAM DUE, SAMD21, SAMD51, Arduino SAMD21 (Nano 33 IoT), MKR1000 / MKR1010WiFi, RP2040-based boards using WiFi101, WiFiNINA, WiFi, Ethernet, WT32_ETH01, Teensy 4.1 NativeEthernet/QNEthernet or Portenta_H7 WiFi/Ethernet, etc. so that those boards can be voice-controlled by Alexa. Now supporting websocket only mode for Socket.IO. Ethernet_Generic library is used as default for W5x00
khoih-prog/WiFiManager_NINA_Lite
Light-Weight WiFi/Credentials Manager for AVR Mega, Teensy, SAM DUE, SAMD, STM32, etc. boards running U-Blox WiFiNINA modules/shields. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. Now using WiFiMulti_Generic library
khoih-prog/MQTTPubSubClient_Generic
MQTT, MQTT_over_WebSockets and Secured MQTT_over_WebSockets Client for Arduino. Supporting nRF52, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, Teensy, SAM DUE, RP2040-based boards, besides ESP8266, ESP32 (ESP32, ESP32_S2, ESP32_S3 and ESP32_C3) and WT32_ETH01. Ethernet shields W5100, W5200, W5500, ENC28J60, Teensy 4.1 NativeEthernet/QNEthernet.
khoih-prog/WiFiManager_RTL8720
Library to configure MultiWiFi/Credentials at runtime for Realtek RTL8720DN, RTL8722DM, RTM8722CSM, etc. boards.
khoih-prog/WiFiManager_Generic_Lite
"Library to configure MultiWiFi/Credentials at runtime for Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano RP2040 Connect, RASPBERRY_PI_PICO), AmebaD RTL8720DN, etc. boards, using Generic WiFi (WiFiNINA, WiFi101, ESP8266-AT, ESP32-AT, etc.) modules/shields. You can also specify DHCP HostName, static AP and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Credentials are saved in LittleFS/InternalFS, (emulated-)EEPROM, FlashStorage_SAMD, FlashStorage_STM32, FlashStorage_RTL8720 or DueFlashStorage. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. DoubleDetectDetector as well as Virtual Switches feature permits entering Config Portal as requested. Now using WiFiMulti_Generic library
khoih-prog/ESP32_New_TimerInterrupt
This library enables you to use Interrupt from Hardware Timers on an ESP32, ESP32_S2, ESP32_S3 or ESP32_C3-based board. It now supports 16 ISR-based timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These hardware timers, using interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's necessary if you need to measure some data requiring better accuracy.
khoih-prog/ESP32_C3_TimerInterrupt
This library enables you to use Interrupt from Hardware Timers on an ESP32-C3-based board. These ESP32-C3 Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you need to measure some data requiring better accuracy. It now supports 16 ISR-based Timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based Timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.
khoih-prog/FTP_Server_Teensy41
FTP Server for Teensy 4.x using SD, LittleFS, etc. with QNEthernet, NativeEthernet, W5x00 with Ethernet_Generic Library or Adafruit Airlift Featherwing using WiFiNINA_Generic Library
khoih-prog/WiFiManager_RP2040W
MultiWiFi/Credentials Manager for RP2040W boards using built-in CYW43439 WiFi. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. Library to configure MultiWiFi/Credentials at runtime for RP2040W boards, using CYW43439 WiFi. You can also specify DHCP HostName and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Credentials are saved in LittleFS. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. DoubleDetectDetector as well as Virtual Switches feature permits entering Config Portal as requested. Now using WiFiMulti_Generic library
khoih-prog/AsyncDNSServer_RP2040W
Fully Asynchronous DNS Server Library for RASPBERRY_PI_PICO_W using CYW43439 WiFi with arduino-pico core. This library is one of the current or future and more advanced Async libraries, such as AsyncWebServer_RP2040W, AsyncHTTPRequest_RP2040W, AsyncHTTPSRequest_RP2040W
khoih-prog/React_Generic
Asynchronous programming library for the generic microcontrollers compatible with the Arduino framework. Currently supporting ESP32, ESP8266, SAMD21/SAMD51, RP2040, STM32, nRF52, Teensy 4.x
khoih-prog/WiFiManager_Portenta_H7_Lite
Library to configure MultiWiFi/Credentials at runtime for Portenta_H7 boards, using built-in WiFi (Murata) modules/shields. You can also specify DHCP HostName, static AP and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Credentials are saved in LittleFS. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. DoubleDetectDetector as well as Virtual Switches feature permits entering Config Portal as requested. Now using WiFiMulti_Generic library
khoih-prog/AsyncUDP_Teensy41
Fully Asynchronous UDP Library for Teensy 4.1 using QNEthernet. The library is easy to use and includes support for Unicast, Broadcast and Multicast environments. This library is one of the current or future Async libraries to support Teensy 4.1 using QNEthernet, such as AsyncHTTPRequest_Teensy41, AsyncHTTPSRequest_Teensy41, AsyncMQTT_Generic, AsyncWebServer_Teensy41, AsyncUDP_Teensy41, AsyncDNSServer_Teensy41, AsyncTCP_SSL_Teensy41, etc.
khoih-prog/AsyncESP32_Ethernet_Manager
ESP32 + LwIP W5500 / ENC28J60, including ESP32-S2, ESP32-S3 and ESP32-C3, Connection and Credentials Manager using AsyncWebServer, with enhanced GUI and fallback Web ConfigPortal
khoih-prog/AsyncWebServer_ESP32_SC_ENC
Asynchronous HTTP and WebSocket Server Library for (ESP32_S2/S3/C3 + LwIP ENC28J60). Now supporting using CString to save heap to send very large data and with examples to demo how to use beginChunkedResponse() to send large html in chunks
khoih-prog/ESP32_S2_TimerInterrupt
This library enables you to use Interrupt from Hardware Timers on an ESP32-S2-based board. These ESP32-S2 Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you need to measure some data requiring better accuracy. It now supports 16 ISR-based Timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based Timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.
khoih-prog/WiFiManager_RP2040W_Lite
Light-Weight MultiWiFi/Credentials Manager for RP2040W boards using built-in CYW43439 WiFi. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. Library to configure MultiWiFi/Credentials at runtime for RP2040W boards, using CYW43439 WiFi. You can also specify DHCP HostName and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Credentials are saved in LittleFS. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. DoubleDetectDetector as well as Virtual Switches feature permits entering Config Portal as requested. Now using WiFiMulti_Generic library
khoih-prog/AsyncFSWebServer_Teensy41
Asynchronous HTTP and WebSocket Server Library for Teensy 4.1 using QNEthernet with FS support. This library is one of the current or future Async libraries to support Teensy 4.1 using QNEthernet, such as AsyncHTTPRequest_Generic, AsyncHTTPSRequest_Generic, AsyncMQTT_Generic, Teensy41_AsyncWebServer, Teensy41_AsyncUDP, Teensy41_AsyncDNSServer, AsyncFSWebServer_Teensy41_SSL, etc.
khoih-prog/AsyncUDP_Ethernet
Fully Asynchronous UDP Library for many boards besides ESP8266, using W5x00 or ENC28J60 Ethernet. Currently supporting only ESP8266. The library is easy to use and includes support for Unicast, Broadcast and Multicast environments. This library is one of the current or future Async libraries to support for ESP8266 using W5x00 or ENC28J60 Ethernet, such as AsyncHTTPRequest_Ethernet, AsyncHTTPSRequest_Ethernet, AsyncWebServer_Ethernet, AsyncDNSServer_Ethernet, AsyncTCP_SSL_Ethernet, etc.
khoih-prog/WIOTerminal_WiFiManager
SAMD51 WIO-Terminal MultiWiFi Connection Manager with enhanced GUI and fallback web ConfigPortal. Now with MultiWiFi auto(Re)connect feature and configurable CORS Header.
khoih-prog/AsyncDNSServer_Teensy41
Fully Asynchronous DNS Server Library for Teensy 4.1 using QNEthernet. This library is one of the current or future Async libraries to support Teensy 4.1 using QNEthernet, such as Teensy41_AsyncTCP, AsyncHTTPRequest_Teensy41, AsyncHTTPSRequest_Teensy41, AsyncMQTT_Generic, AsyncWebServer_Teensy41, AsyncDNSServer_Teensy41, AsyncDNSServer_Teensy41, AsyncTCP_SSL_Teensy41, etc.
khoih-prog/AsyncESP8266_Ethernet_Manager
(ESP8266 + LwIP W5500 / W5100(S) / ENC28J60) Connection and Credentials Manager using AsyncWebServer, with enhanced GUI and fallback Web ConfigPortal. This Library is used for configuring (ESP8266 + LwIP W5500 / W5100(S) / ENC28J60) Credentials Manager at runtime
khoih-prog/ESP32_SC_ENC_Manager
ESP32_S2/S3/C3 + LwIP ENC28J60 Connection and Credentials Manager, with enhanced GUI and fallback Web ConfigPortal. This Library is used for configuring ESP32_S2/S3/C3 + LwIP ENC28J60 Credentials Manager at runtime. You can also specify static DNS servers, personalized HostName, static or DHCP IP
khoih-prog/Teensy41_AsyncTCP
Asynchronous TCP Library for Teensy 4.1 using QNEthernet. This library is the base for future Async support for many current or future libraries, such as AsyncHTTPRequest_Generic, AsyncHTTPSRequest_Generic, AsyncMQTT_Generic, AsyncWebServer_Teensy41, AsyncUDP_Teensy41, AsyncDNSServer_Teensy41, AsyncTCP_SSL_Teensy41, etc.
khoih-prog/AsyncESP8266_W5100_Manager
(ESP8266 + LwIP W5100 / W5100S) Connection and Credentials Manager using AsyncWebServer, with enhanced GUI and fallback Web ConfigPortal. This Library is used for configuring (ESP8266 + LwIP W5100 / W5100S) Credentials Manager at runtime. You can also specify static DNS servers, personalized HostName, static or DHCP IP
khoih-prog/ESP32_SC_Ethernet_Manager
(ESP32_S2/S3/C3 + LwIP W5500 / ENC28J60) Connection and Credentials Manager, with enhanced GUI and fallback Web ConfigPortal. This Library is used for configuring (ESP32_S2/S3/C3 + LwIP W5500 / ENC28J60) Credentials Manager at runtime. You can also specify static DNS servers, personalized HostName, static or DHCP IP
khoih-prog/ESP32_SC_W5500_Manager
ESP32_S2/S3/C3 + LwIP W5500 Connection and Credentials Manager using AsyncWebServer, with enhanced GUI and fallback Web ConfigPortal. This Library is used for configuring ESP32_S2/S3/C3 + LwIP W5500 Credentials Manager at runtime. You can also specify static DNS servers, personalized HostName, static or DHCP IP