kizniche/ttgo-tbeam-ttn-tracker

Issues

• Problems with Compiling vor v07 with theses Fixes it works

  #60 opened a year ago by Wlanfr3ak
  1

• multiple definition of `hal_init';

  #45 opened 2 years ago by Raki22
  4

• Issue with TTGO TBEAM AXP2101 V1.2

  #62 opened a year ago by vemanthchandrap
  0

• update lilygo t-beam 1.2

  #59 opened a year ago by RoZelm0
  7

• Suggestion: Use Tasmota as main firmware?

  #61 opened a year ago by hagenbuch
  0

• GPS doesn't work...

  #20 opened 4 years ago by schroepfer
  59

• Chirpstack V3->V4 decoder compatibility

  #58 opened a year ago by kgarwoodsdzwa
  0

• No more booting when battery dies or is removed

  #57 opened a year ago by NoFloXx
  1

• Getting Rev 1.1 working in eu_868

  #26 opened 4 years ago by pbgben
  4

• No issue. How to change SEND_INTERVAL?

  #56 opened 2 years ago by webwizzard1405
  0

• Cant change the spreading factor to sf12. All packets sent on sf7.

  #55 opened 2 years ago by gougakos
  3

• Spreading Factor Increases on OTAA with ADR off

  #10 opened 2 years ago by tkerby
  7

• Request: Only send when location changes

  #52 opened 2 years ago by sweetpants
  6

• Request: Support for newer chipset SX1262

  #54 opened 2 years ago by DerWossi
  2

• Question: Add BAT status to payload?

  #53 opened 2 years ago by gitpower2017
  1

• ttn decoded data is different to display/serial console data

  #37 opened 4 years ago by muckisg
  6

• Compiling fails in axp192Init

  #50 opened 2 years ago by simonszu
  2

• local time corrected by network time

  #51 opened 2 years ago by urs8000
  0

• The Things Stack v3 - Frame Counter does not reset

  #44 opened 2 years ago by Quas7
  3

• Unable to join TTN either in OTAA or ABP mode !!

  #22 opened 4 years ago by vincegre
  11

• Join fails

  #48 opened 3 years ago by mdede439
  2

• Message queued and transmitted but not received on TTN

  #28 opened 4 years ago by squeakus
  5

• Error compiling for board T-Beam

  #47 opened 3 years ago by LevendSpacePeak
  6

• TBeam will not accept JOIN-ACCEPT without GPS lock

  #46 opened 3 years ago by ab0oo
  1

• REQUEST: Point 6

  #42 opened 3 years ago by catalinalb
  2

• SF7 seems to be unreliable in EU1 TTN

  #43 opened 3 years ago by Quas7
  1

• 'LMIC_getSessionKeys' was not declared in this scope

  #29 opened 4 years ago by Mohamedx7
  2

• Tutorial is and code is not working

  #39 opened 3 years ago by elpidoforo
  4

• Getting PinMAPPING error trying to compile with AS923 frequency

  #40 opened 3 years ago by wahidyak
  2

• Unable to compile project in Arduino 1.8.15

  #38 opened 3 years ago by vincegre
  13

• WIP for deep sleep support

  #13 opened 5 years ago by geeksville
  8

• Deep sleep blocking ACK for confirmed downlinks

  #36 opened 4 years ago by kickouille
  0

• Add Battery / Charging status to Payload

  #34 opened 4 years ago by grahamrobertslx
  2

• Install error

  #33 opened 4 years ago by reivis
  0

• GPS data not pulled

  #30 opened 4 years ago by mbobinger
  1

• Noname SSD1306 not working properly

  #31 opened 4 years ago by mbobinger
  1

• REQUEST: Option for board without oled display

  #27 opened 4 years ago by strobel1x
  1

• Board is taking a lot of time to start sending messages out

  #25 opened 4 years ago by d4ng0
  0

• AXP192 Status

  #9 opened 4 years ago by tkerby
  3

• Need to make changes to ttn.ino to support single channel gateways

  #5 opened 4 years ago by mtbspace
  10

• Lora not joining

  #6 opened 4 years ago by netmonk
  6

• cayenne mydevices device

  #15 opened 4 years ago by chrkan
  3

• 433mHz

  #12 opened 4 years ago by skyden-ua
  1

• Replacing lmic_project_config.h overwrites new settings

  #16 opened 4 years ago by AusUser5
  2

• Sat Lock. Wait for x sats

  #21 opened 4 years ago by dafyddhirst
  1

• 'axp' was not declared in this scope

  #19 opened 4 years ago by schroepfer
  1

• How to work with the downlink message?

  #18 opened 5 years ago by HouzuoGuo
  2

• Battery life

  #14 opened 5 years ago by SeungRyeol
  1

• axp192 LoRa ( sx1276 ) Voltage

  #8 opened 5 years ago by Internetwurm
  8

• Information, SH1106 looks like SSD1306 ;-)

  #7 opened 5 years ago by Internetwurm
  1