Inverter input data
rvdgaag opened this issue · 4 comments
rvdgaag commented
Is there a way to read the power coming in to the GEN ports from a Microinverter and display it in Home Assitant ?
luckylinux commented
Probably these registries ? Never tested though ...
https://github.com/luckylinux/esphome-for-deye/blob/main/modules/generator.yaml
rvdgaag commented
Thanks, it works fine after a few ID changes ! Now I can remove the fucking solarman integration at last !
luckylinux commented
Did I have some Registers wrongly defined ? Or you mean you just adjusted the ${entities_name_prefix} etc ?
rvdgaag commented
The prefix, had to change it to name: "${device_type}-Generator Voltage Phase L1"
id: "${device_type}_generator_voltage_phase_l1"
…________________________________
Van: luckylinux ***@***.***>
Verzonden: Friday, April 26, 2024 12:56:17 PM
Aan: klatremis/esphome-for-deye ***@***.***>
CC: rvdgaag ***@***.***>; Author ***@***.***>
Onderwerp: Re: [klatremis/esphome-for-deye] Inverter input data (Issue #37)
Did I have some Registers wrongly defined ? Or you mean you just adjusted the ${entities_name_prefix} etc ?
—
Reply to this email directly, view it on GitHub<#37 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ACNTC3ZYQBRJCY534FIXG7TY7IXFDAVCNFSM6AAAAABG2G5HNSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZZGE2TQNJRG4>.
You are receiving this because you authored the thread.Message ID: ***@***.***>