klatremis/esphome-for-deye

Issues

• Functionality request

  #43 opened 4 months ago by rvdgaag
  4

• Generator Data

  #44 opened 2 months ago by SyncMXL
  0

• Set the Deye at its lowest possible self-consumption

  #31 opened 10 months ago by Breinholm-coder
  8

• Daily charge of battery

  #41 opened 6 months ago by jais86
  4

• Change bit 4 and 5 on address 178

  #42 opened 5 months ago by Vali7719
  37

• Erratic inputs from Deye 12K repeatedly received

  #38 opened 8 months ago by parkflyer
  7

• TX or RX ist blinking not both

  #40 opened 8 months ago by off99
  0

• Inverter input data

  #37 opened 8 months ago by rvdgaag
  4

• Why is "Out-of-grid–total power" not updated every time?

  #36 opened 8 months ago by sundsvald
  2

• could this work on ESP8266?

  #35 opened 8 months ago by vrabi-cv
  0

• Connection "freeze" with: [W][modbus:108]: Modbus CRC Check failed!

  #34 opened 9 months ago by krieger-nds
  1

• Issues when communicating with inverter

  #33 opened 9 months ago by marval
  6

• after powercycle incorrect values are sent

  #12 opened 2 years ago by linuxdep
  9

• 98 - Control Mode - Enable/Disable Battery?

  #22 opened a year ago by TheSmartGerman
  10

• Microinverter on the generator port

  #32 opened 9 months ago by Renejeppesen
  2

• Inverter does not responde on modbus

  #29 opened a year ago by Jxhannes
  1

• Set value for ''Max grid shave power'' from ESP32

  #30 opened a year ago by Vali7719
  0

• Kann man das auch über den CAN Bus und nem UsB to RS485 umsetzen

  #28 opened a year ago by lordvalium
  0

• exit status 1 invalid preprocessing directive #Enable

  #26 opened a year ago by Belmir
  0

• Entities becomes unavailable

  #25 opened a year ago by chinezbrun
  3

• Daily Consumption

  #24 opened a year ago by tobenski
  3

• no response received

  #21 opened a year ago by dj9717
  5

• Implement MQTT without need of HomeAssistant

  #18 opened a year ago by k2dp2k
  1

• Duplicate modbus command found

  #11 opened a year ago by manalishi70
  5

• RS485/TTL-board brænder ofte af.

  #17 opened a year ago by zaprodk
  9

• Random measures from SUN-12K

  #3 opened a year ago by AndihX
  7

• Ingen kommunikation med flere invertere

  #16 opened a year ago by HansPeterHaastrup
  8

• Total PV Power

  #20 opened a year ago by Adminius
  4

• Issues with ESP8266

  #19 opened a year ago by pollierer
  3

• New input not written correct

  #14 opened a year ago by Terkelchr
  1

• Question to modbus operation ?

  #5 opened 2 years ago by fabhund
  3

• Question: Chances this could work for the SUN-5K-SG03LP1?

  #13 opened 2 years ago by kiss81
  1

• what is the use of Grid_Charge?

  #10 opened 2 years ago by itiotdk
  2

• Modbus-register

  #8 opened 2 years ago by dowermyr
  5

• data 0

  #1 opened 2 years ago by frenchkiss38
  4

• configuring system work mode

  #6 opened 2 years ago by gmidohan
  1

• Home Assistant Energy Dashboard Error

  #7 opened 2 years ago by linuxdep
  3

• Installation

  #4 opened 2 years ago by dowermyr
  0

• Number to time

  #2 opened 2 years ago by kababoom
  4