lbl-srg/modelica-buildings

Issues

• Update Spawn to EnergyPlus 24.2.0

  #3911 opened 5 months ago by kbenne
  17

• Analyze Buildings.DHC.Plants.Combined.Examples.AllElectricCWStorage with OpenModelica

  #3910 opened 5 months ago by mwetter
  1

• Update CI tests to OpenModelica 1.24.0

  #4025 opened a month ago by mwetter
  0

• Model Buildings.Templates.Plants.Controls.Utilities.Validation.TimerWithReset fails verification

  #3952 opened 4 months ago by AndreaBartolini
  12

• Reduce tolerance by a factor 10 when generating reference trajectories for testing

  #4016 opened 2 months ago by casella
  2

• Check models that fail as actuator model has been updated

  #4002 opened 2 months ago by mwetter
  6

• Reference data should be properly sampled to avoid aliasing issues

  #4017 opened 2 months ago by casella
  0

• Buildings.ThermalZones.Detailed.Examples.FFD.* fail at runtime, probably because of binary issues

  #4015 opened 2 months ago by casella
  0

• Pumps work against closed valves

  #3989 opened 2 months ago by JayHuLBL
  0

• problem Dymola with IDEAS-3.0/ReaderTMY3

  #4012 opened 2 months ago by jagica
  2

• Difference in energyplus and buildinglib biquadratic formulation

  #4009 opened 2 months ago by TeoGoddet
  2

• Issue with dimensions after updated actuator model

  #4004 opened 2 months ago by maltelenz
  3

• Updating ice tank model

  #4007 opened 2 months ago by rpatureau
  0

• Heat pump water heaters from EnergyPlus

  #4003 opened 2 months ago by karthikeyad-pnnl
  0

• Refactor actuator travel time

  #3965 opened 2 months ago by mwetter
  2

• Failed to simulate moisture transfer in Spawn

  #4001 opened 2 months ago by xyewws
  2

• Broken html links

  #3992 opened 2 months ago by mwetter
  1

• Problem concerning the singularity of the matrix.

  #3990 opened 3 months ago by FrancescoPavarelli23
  3

• Using the radiative heat port of SPAWN thermal zones leads to the simulation failing midway.

  #3994 opened 3 months ago by Mov0
  0

• FMU instantiation in SPAWN fails if installation directory has space, even though the problem has been addressed in the past.

  #3993 opened 3 months ago by Mov0
  0

• Error when selecting medium from the dropdown list

  #3970 opened 3 months ago by JayHuLBL
  0

• Incorrect output of TrueFalseHold when using a unit impulse input signal

  #3966 opened 3 months ago by AntoineGautier
  1

• Some models fails verification due to the stopTime is smaller than the startTime

  #3964 opened 3 months ago by AndreaBartolini
  0

• Remove SpeedCntrolled_Nrpm models in Obsolete package

  #3968 opened 3 months ago by mwetter
  0

• Dymola 2025x

  #3978 opened 3 months ago by mwetter
  1

• Model Buildings.ThermalZones.EnergyPlus_9_6_0.Examples.SmallOffice.IdealHeatingCoolingWinter fails verification

  #3963 opened 3 months ago by AndreaBartolini
  0

• OBC CDL UnitDelay Block Doesn't Delay the Input Signal

  #3953 opened 3 months ago by wehuang16
  2

• Models failing Dymola-OpenModelica cross verification with actualStream() at zero-flow

  #3957 opened 3 months ago by hcasperfu
  0

• Model Buildings.Fluid.BaseClasses.FlowModels.Validation.BasicFlowFunction_dp_DerivativeCheck2 fails verification

  #3928 opened 3 months ago by AndreaBartolini
  2

• Model Buildings.Fluid.CHPs.BaseClasses.EfficiencyCurve has double Icon annotations

  #3954 opened 3 months ago by NirmalaModelon
  3

• Another strange case of unmatching results vs reference file

  #3918 opened 3 months ago by AndreaBartolini
  4

• Update reference results with latest version of pyfunnel

  #3950 opened 4 months ago by AntoineGautier
  1

• Failed to find variable AFlo in EnergyPlus.fmu

  #3945 opened 4 months ago by hoxj180
  8

• Model Buildings.Fluid.Chillers.ModularReversible.Examples.Modular fails verification

  #3930 opened 4 months ago by AndreaBartolini
  4

• Model Buildings.Fluid.HeatPumps.ModularReversible.Examples.AirToWater2D_OneRoomRadiator fails verification due to some control settings

  #3943 opened 4 months ago by AndreaBartolini
  1

• Can not use 'Buildings.HeatTransfer.Data.OpaqueConstructions.Generic'

  #3944 opened 4 months ago by n-marci
  1

• Hard-to-solve nonlinear loop in heat pump model

  #3924 opened 4 months ago by casella
  2

• Simplify Templates.Components.Controls.StatusEmulator

  #3923 opened 4 months ago by mwetter
  7

• Validate freeze protection logic

  #3917 opened 5 months ago by AntoineGautier
  2

• Buildings.Examples.ChillerPlant.DataCenterDiscreteTimeControl fails verification

  #3939 opened 5 months ago by mwetter
  0

• remove top-level requirements.txt

  #3934 opened 5 months ago by mwetter
  2

• Critical situation in the logic plrToPul of the models Buildings.Fluid.DXSystems.Heating.AirSource.Validation.SingleSpeed_xxx

  #3936 opened 5 months ago by AndreaBartolini
  0

• undefined reference to `fmi2Instantiate'

  #3929 opened 5 months ago by lyw2024
  1

• Improve templates test workflow

  #3926 opened 5 months ago by AntoineGautier
  1

• Increase templates test coverage to 100%

  #3922 opened 5 months ago by mwetter
  0

• Preliminary heat pump plant templates with heat recovery

  #3919 opened 5 months ago by karthikeyad-pnnl
  0

• Preliminary control modules for heat pump plant with heat recovery

  #3920 opened 5 months ago by karthikeyad-pnnl
  0

• Fix algebraic loops appearing after refactoring hold block

  #3915 opened 5 months ago by AntoineGautier
  1

• Impact of TrueFalseHold refactoring on SwitchBox

  #3906 opened 5 months ago by AntoineGautier
  1

• Some discrepancies in the reference file for the model Buildings.Electrical.AC.ThreePhasesUnbalanced.Sensors.Examples.Sensors

  #3912 opened 5 months ago by AndreaBartolini
  0