leofabri/hassio_appliance-status-monitor

Issues

• Changing State Names

  #32 opened a year ago by thebotanists
  5

• Consider and support "unavailable" power/socket entities

  #38 opened 2 months ago by amitkeret
  0

• Why should the duration of the delayed job completion timer be left at 15 mins?

  #37 opened 6 months ago by woobenjamin
  0

• Errors around 'appliance_socket' in template

  #35 opened 6 months ago by scottfridwin
  1

• Feature Request - Start delay

  #33 opened a year ago by gianlucasullazzo
  1

• Delay start (pre wash with minimum cycle time resulting in pause not completed if under 5 minutes run)

  #34 opened 10 months ago by rhalliwellfa
  0

• Is it possible to add the duration of a job?

  #28 opened a year ago by tidharmor
  1

• Settings for 3 phase device

  #31 opened a year ago by viktorp75
  0

• Add Option to hold state as "completed" for x minutes

  #30 opened a year ago by KevinFromUpThere
  1

• false starting trigger

  #29 opened a year ago by FinestDice17
  2

• configuration.yaml Error

  #27 opened a year ago by flo2126
  5

• Enable job_complete > idle state change based on binary_sensor door switch

  #26 opened 2 years ago by millercentral
  0

• Add an option to select the power attribute

  #25 opened 2 years ago by Superpiffer
  1

• Job Started Delay

  #24 opened 2 years ago by nitaybz
  1

• Request: Example Lovelace card to show status of an appliance

  #20 opened 2 years ago by ankushg
  1

• Add an option to disable the switch state of the socket

  #21 opened 2 years ago by leofabri
  0

• Add an option to enter the job_completed state when the socket is on, the appliance's job never started, and it's not been used for longer then X seconds

  #22 opened 2 years ago by leofabri
  0

• Add an option to enter job_completed when the socket is turned off

  #23 opened 2 years ago by leofabri
  1

• Input select to normal state

  #16 opened 2 years ago by injectx
  3

• [Improvement] Helpers in a package

  #8 opened 2 years ago by HollyFredD
  2