Issues
- 3
STM32F302xD/E: vector table to small
#1561 opened by silischulzi - 2
- 1
Incorrect offset for STM32 G4 dual bank option bit
#1559 opened by amcnicoll - 0
STM32G0: Incorrect DAC definitions
#1558 opened by hepoun - 0
STM32: Timer function timer_clear_flag bug?
#1556 opened by alwinl - 0
smt32 usb flags question
#1555 opened by lzace817 - 0
PWR_PUCR macro does not work
#1554 opened by amcnicoll - 0
H7 Wrong SDMMC (SDIO) register defines
#1553 opened by OrnellaBenzi - 1
- 1
H7 Wrong RCC Register Defines
#1547 opened by OrnellaBenzi - 1
support for STM32G491RE board
#1545 opened by Himanshukohale22 - 2
add timeout to I2C calls
#1524 opened by PocketPi - 2
STM32L476-Discovery UF2 MSC bootloader dos not enumerate
#1543 opened by pavavra - 1
Support for STM32H7 series
#1544 opened by OrnellaBenzi - 1
STM32F103C8T6 usbhid sample not recognized
#1542 opened by aguaviva - 2
DMA for STM32H7
#1501 opened by srobertjames - 1
usb not wokring on STM32F412ZG
#1492 opened by PocketPi - 2
REQ: Configurable constness of USB descriptors.
#1541 opened by amalinowski75 - 0
CodeSoft
#1539 opened by ghadeerraza09 - 2
- 1
Thanks and support to maintainers
#1537 opened by f4grx - 0
Missing closing bracket in file libopencm3/include/libopencm3/stm32/common /quadspi_common_v1.h
#1534 opened by RomanBuchert - 2
- 0
If there is an interface association descriptor (IAD), bNumInterfaces should be corrected.
#1532 opened by rhoog-ine - 1
STM32G0: failed assertion trying to set USART4 baud rate
#1529 opened by scgtrp - 0
Make lib issue and solution!
#1528 opened by ngminhthanh12a3 - 0
FMAC support
#1527 opened by m0rphex - 1
- 5
Filename collision, no lib prefix
#1517 opened by mrx23dot - 3
Position Independent Code
#1497 opened by PocketPi - 3
- 2
STM32G0: #include <libopencm3/cm3/nvic.h> leads to a NON existing [libopencm3/stm32/g0/nvic.h]
#1514 opened by zinahe - 0
Incomplete documentation for init_can on STM32
#1512 opened by riban-bw - 0
Add API for STM32 USB config bit GCCFG_NOVBUSSENS
#1511 opened by qosch - 2
API differs significantly between target microporcessors
#1509 opened by riban-bw - 2
- 3
Support for RP2040 ARM Cortex-M0+ MCU
#1496 opened by hattesen - 0
No function to enable I2C slave (STM32F0)
#1508 opened by riban-bw - 1
STM32C0 Support
#1507 opened by berge472 - 1
Alterate function seams to not have effect.
#1506 opened by dsimonet - 1
libopencm3_stm32f1.a(vector.o) uses VFP register arguments
#1505 opened by kovmir - 2
STM32L496 USB CDC-ACM
#1504 opened by ALSCode - 0
Support for STM32H5 chips
#1503 opened by PocketPi - 0
STM32 functions timer_ic_enable() and timer_ic_disable() are contolling OC output pins instead
#1494 opened by kernkraftzwerg - 0
Copy-paste error in dmamux.h for STM32G4
#1491 opened by kernkraftzwerg - 6
Question about STM32WLxx support
#1488 opened by virtualabs - 3
Allowing bootloaders in genlink.py or device.data
#1487 opened by dxhisboy - 0
- 1
[Linux]compile-error: "arm-none-eabi-gcc: 1: cannot open @@P�@8: No such file"
#1485 opened by Sebastian-69420 - 0
clear
#1484 opened by Sebastian-69420