fail to launch rc tree construction
JeffreyzzZ0 opened this issue · 14 comments
Dear Prof Lin @limbo018 , Sorry to bother you, When I use DREAMPace to do timing-driven global placement, I met the error that DREAMPlace failed to launch rc tree construction and lead to a segmentation fault. I have set the configuration for timing-driven placement, and I cant figure out what actually happend. Here are my configuration and log. Can you give me some suggestions how to deal with it ,Thank you!
the error seems come from here in the path DREAMPlace/dreamplace/ops/timing/src/timing_cpp.cpp ,what should I change ?
The segmentation fault comes from FLUTE. Based on my experience, typically it is because some input files cannot be found or they are in an invalid format. You can check whether the LUT paths are correct first. If they are correct and FLUTE succeeds to read the LUTs, which means the error occurs inside FLUTE, you'd better use some debugging tools to find where the error comes from exactly.
By the way, may I know whether you are working on ICCAD 2015 benchmarks? If not, does this error occur on ICCAD 2015 benchmarks?
The segmentation fault comes from
FLUTE. Based on my experience, typically it is because some input files cannot be found or they are in an invalid format. You can check whether the LUT paths are correct first. If they are correct andFLUTEsucceeds to read the LUTs, which means the error occurs insideFLUTE, you'd better use some debugging tools to find where the error comes from exactly.By the way, may I know whether you are working on ICCAD 2015 benchmarks? If not, does this error occur on ICCAD 2015 benchmarks?
Thank you for your reply. I have changed the LUT paths to absolute paths and rebuilt DREAMPlace, but the issue still persists. The LUT files are included in the DREAMPlace source code, and I have not made any changes to them. I am not working on ICCAD 2015 benchmarks; I am simply trying to use a simple case for timing-driven placement. Is there any possibility that somewhere else could be wrong?
It is very likely you give some invalid input files. Looks like it goes well without timing opt, so you may need to check your .lib and .sdc files. Make sure they have the same format as the examples of ICCAD 2015.
It is very likely you give some invalid input files. Looks like it goes well without timing opt, so you may need to check your
.liband.sdcfiles. Make sure they have the same format as the examples of ICCAD 2015.
thank you very much , I will have a try
It is very likely you give some invalid input files. Looks like it goes well without timing opt, so you may need to check your
.liband.sdcfiles. Make sure they have the same format as the examples of ICCAD 2015.
I tried to work on the ICCAD 2015 benchmarks, the Segmentation fault persists
You mean you cannot even make a complete run on ICCAD 2015 benchmarks? That is really weird. Are your benchmarks downloaded from the link provided in benchmarks/iccad2015.ot.md?
You mean you cannot even make a complete run on ICCAD 2015 benchmarks? That is really weird. Are your benchmarks downloaded from the link provided in
benchmarks/iccad2015.ot.md?
Exactly, I think the timing_cpp.cpython-38-x86_64-linux-gnu.so was compiled successfully, maybe I need to debug python file and .so file together.
My own experience suggests that it is because flute failed to read the files or OpenTimer failed to parse timing inputs. Since it's too hard for me to reproduce the error, I am afraid I could not offer too much help. If possible, you can use tools like gdb and valgrind or simply print some debugging messages to find what is going on inside that function.
My own experience suggests that it is because
flutefailed to read the files orOpenTimerfailed to parse timing inputs. Since it's too hard for me to reproduce the error, I am afraid I could not offer too much help. If possible, you can use tools likegdbandvalgrindor simply print some debugging messages to find what is going on inside that function.
I'm sorry for the delay due to other matters and forgetting to reply to you. Now I'm back to this problem and have located it, the FLUTE can successfully read lut files but when it do for loops，when d=7, k=5585 ,it stopped.I analysed the core dumped,It says Program terminated with signal 11, Segmentation fault.
#0 0x00007f975eadf9c5 in _int_malloc () from /usr/lib64/libc.so.6, Do you have any idea about it? thank you
I don't have a clue. Is it possible for you to share your cases with me?
I just noticed that this error occurred even when you are running the program on ICCAD 2015 benchmarks. I really don't have a clue why it does not work if you did not commit any change 😢. One way is just as what I said, you share the new case with me and let me see whether I can successfully go through with it.
I just noticed that this error occurred even when you are running the program on ICCAD 2015 benchmarks. I really don't have a clue why it does not work if you did not commit any change 😢. One way is just as what I said, you share the new case with me and let me see whether I can successfully go through with it.
thank you for you help, I just clean the env variables , re clone the repo and rebuild it . It can successfully run the ICCAD benchmarks, it is quite wired but finally work!
@JeffreyzzZ0 Glad to hear that.
By the way, from the first screenshot you provided in the issue description, I found that it converged very fast on your own case. The overflow had already achieved 0.068 at Iteration 509, so it might be too late to optimize timing. You can try modifying the code to start timing optimization earlier. It should be beneficial to your results.