linorobot/linorobot2_hardware

problem while using humble distro with linorobot2_hardware(galactic branch)

hemsinghb opened this issue · 3 comments

hemsinghb commented

Hi Every one, Any one tried with RoS2 Humble with Linorobot2_hardware ?

I tried with presently avaiable linorobot2_hardware (galactic branch) and failed to make map. When moving robot front and back robot not moving on rviz, however turning left and right is ok. So the map could not be made . May be issues with ekf or slam config.yaml file etc. If any one found solution please guide. Thank you, ...Hems.

atticusrussell commented

@hemsinghb I have tested ROS2 Humble with linorobot2_hardware. Can you try the humble branch and report back?

If it works and the issue is resolved, feel free to mark the issue as closed.

hemsinghb commented

Thank you so much, its working fine.

atticusrussell commented

@hemsinghb Awesome. Can you click the purple button at the bottom of this issue to close it?

Could you also close the other issues you opened about this topic: #27 and #30 ?