litex-hub/litespi

Issues

• clkgen from STARTUPE3 and more

  #78 opened 3 months ago by jersey99
  4

• Support the SPI RAM found on HAD badge

  #25 opened 5 months ago by mithro
  5

• Support Auto-Initializing SPI Flashes to Quad Mode

  #66 opened 3 years ago by cr1901
  3

• x4 configuration: read flash config/status errors (x1 mode)

  #63 opened 3 years ago by gregdavill
  0

• Add DDR support for Fomu

  #62 opened 3 years ago by tcal-x
  0

• litex.soc.doc generation error

  #61 opened 3 years ago by gregdavill
  5

• Check simplified generic_sdr PHY / Apply changes to generic_ddr PHY.

  #58 opened 3 years ago by enjoy-digital
  2

• Improve resources usage.

  #54 opened 3 years ago by enjoy-digital
  6

• How to write to flash?

  #52 opened 3 years ago by navaneeth-cirel
  13

• Missing opcodes in auto-generated Modules.

  #55 opened 3 years ago by enjoy-digital
  4

• How does partial erase work?

  #35 opened 5 years ago by mithro
  1

• Arty: Example for storing gateware on SPIflash

  #49 opened 3 years ago by dayjaby
  3

• Fix the name of LiteSPI instance in example/arty.py

  #39 opened 3 years ago by kowalewskijan
  2

• Make 10000 cycle timeout configurable

  #43 opened 4 years ago by tcal-x
  2

• Speed test fails at DIV=0, reverts to lower speed

  #45 opened 4 years ago by zyp
  1

• Adding more ports to crossbar, how to handle arbitration?

  #46 opened 4 years ago by zyp
  1

• Support for ECP5 boot flash in LiteSPI

  #40 opened 4 years ago by derekmulcahy
  3

• Feedback / Contribution / Support

  #42 opened 4 years ago by enjoy-digital
  0

• Support using the SPI controller in a separate clock domain

  #23 opened 5 years ago by piotr-binkowski
  5

• Verify that dummy bits are handled correctly in I/O modes

  #34 opened 5 years ago by piotr-binkowski
  0

• Wrong data read from SPI flash on Arty

  #32 opened 5 years ago by kowalewskijan
  0

• Improve PHY MMAP/Master sharing?

  #20 opened 5 years ago by enjoy-digital
  0

• Add non-generated SPI NOR chip example

  #17 opened 5 years ago by mithro
  0

• Make sure no combinatorial logic is used for the synchronous IOs.

  #18 opened 5 years ago by enjoy-digital
  1

• Rename XIP to MMAP?

  #19 opened 5 years ago by enjoy-digital
  0

• Convert argument to triple quoted string

  #15 opened 5 years ago by mithro
  0

• Move MetaSizes into its own file

  #16 opened 5 years ago by mithro
  0

• Support talking to an SD Card in SPI mode

  #26 opened 5 years ago by mithro
  0

• Create a SPI Flash emulation model

  #24 opened 5 years ago by mithro
  1

• Add link to Mithro's roadmap document

  #4 opened 5 years ago by mithro
  0

• Add readthedocs auto-generation

  #6 opened 5 years ago by mithro
  0

• Figure out if it makes sense to import @xobs' spibone stuff

  #7 opened 5 years ago by mithro
  1

• Add travis CI

  #5 opened 5 years ago by mithro
  2

• Import size cross-checking Python code

  #12 opened 5 years ago by mithro
  1

• Add command line tool for displaying table of SPI flash modules supported

  #11 opened 5 years ago by mithro
  2

• Import enums from Mithro's old work

  #3 opened 5 years ago by mithro
  1