@inproceedings{ohira2021pli-tdc,
title={PLI-TDC: Super Fine Delay-Time Based Physical-Layer Identification with Time-to-Digital Converter for In-Vehicle Networks},
author={Ohira, Shuji and Kibrom Desta, Araya and Arai, Ismail and Fujikawa, Kazutoshi},
booktitle={Proceedings of the ACM Asia Conference on Computer and Communications Security (ASIACCS)},
pages={176--186},
year={2021},
doi={10.1145/3433210.3437530},
organization={ACM}
}
This repository publishes the source code of the sender identification method based on delay-time using Time-to-Digital Converter for automotive network security. You will be able to find the detailed theory and design in our paper after the ASIACCS'21 conference (June 7-11, 2021).
The code consists of three parts:
- Hardware source programs written by Verilog HDL for intel DE0-CV Cyclone V FPGA.
- Machine learning scripts implemented by Python 3 and the Proof-of-Concept data.
- SPI receiver programs implemented by C for receiving the raw delay-time data.
3.8.6 or later
Quartus Prime Lite Edition (v17.0.0 or later)
- Intel DE0-CV Cyclone V Board
- Raspberry Pi Model B or B+
- temperature sensor (DS18B20)
- CAN transciever (mcp2551)
According to the our Quartus Prime Settings File (PLI_TDC_for_CAN/hardware/intel_cyclone_5/PLI_TDC.qsf
), you can set up the wiring as the following figure.
DS18B20 resistor: 4.7K Ohm or 10K Ohm resistor
$ git clone https://github.com/shuji-oh/PLI_TDC_for_CAN
$ cd PLI_TDC_for_CAN
$ pip3 install -r requirements.txt
$ cd machine_learning/prototype
$ python3 rf.py
Our method employs the temperature characteristic as one of the features to be robust in the temperature concept drift. So, please set up the raspberry pi model B or B+ and DS18B20 temperature sensor based on some articles. After the setting, you can build and execute the SPI receiver program on your raspberry pi.
$ git clone https://github.com/shuji-oh/PLI_TDC_for_CAN
$ cd PLI_TDC_for_CAN/recv_script
$ ./build.sh
$ ./tdc_recv --speed 4000000
At first, please install and run the Quartus Prime on your workstation. Besides, please set up the connectivity between hardware (FPGA) and your workstation in advance. And, after downloading this repository, please perform the following procedures in the Quartus app.
[File menu] ⇒ [Open Project...] ⇒ [Select PLI_TDC_for_CAN/hardware/intel_cyclone_5/PLI_TDC.qpf
] ⇒ [Start Compilation]
After above compilation, please transmit the circuit information to the FPGA.
[Programmer] ⇒ [Start button in the Programmer Window]