/usonic_water_flowmeter

An ultrasonic water flowmeter based on transit-time technique

Primary LanguageC

Ultrasonic Water Flowmeter Based on Transit-Time Technique

Brief

This is a battery powered waterflow meter project I did freelancing in 2015.

The measurement results are displayed on the LCD and are also sent to the PC.

How it works

Ultrasonic time-pulse meters are based on sending ultrasonic signals to the acoustic channel.

These signals are sent upstream and downstream. For this purpose, two piezoceramic transducers directed at each other are used. Each of trandusers can work as a receiver and a transmitter.

The signal propagation will be influenced by the flow flowing at a speed V. The propagation time of the signal from the upstream transmitter A to the downstream receiver B will be less than the propagation time of the signal from the downstream transmitter B to the upstream receiver A. Thus, the difference in time of flight between these two signals will be directly proportional to the flow rate V.

Draw

From: Realization of An Ultrasonic Water Flowmeter Based on Transit-Time Technique, Chizhov Nikolai, 2017.

Equipment

Hardware:

  • STM32L100RB
  • TDC-GP22: Time to Digital Converter
  • LCD (custom model)
  • etc.

IDE: Keil uVision