macOS on Lenovo ThinkPad T480s

This repository contains a sample configuration to run macOS (Currently Mojave 10.14) on a Lenovo ThinkPad T480s

Used Hardware Configuration

Lenovo ThinkPad T480s
- Intel i5-8250U
- 8GB RAM onboard + Crucial DDR4 2400-SODIMM
- Samsung 970 evo NVMe SSD
- Dell DW1560 Wireless (original Intel AC8265 not working)
  - Wi-Fi device ID [14e4:43b1], shows as Apple Airport Extreme due to AirportBrcmFixup.kext
  - Bluetooth device ID [0a5c:216f], chipset 20702A3 with firmware v14 c5882 using BrcmPatchRAM2.kext
- Realtek ALC257 by AppleALC.kext with layout-id 11 (requies a patch, already patched in this repo)
- Intel UHD Graphics 620 (Nvidia MX150 disabled, Optimus not supported by macOS)
- Power management and battery status by ACPI hotpatching
- Integrated camera (works out of the box)
- Keyboard/Elan Touchpad (PS/2) using ApplePS2SmartTouchPad.kext v4.7b5 by EMlyDinEsH
  - Support multi-touch gestures
  - Need to disable Trackpoint in BIOS (otherwise touchpad would be disconnected)
  - Requires to patch the binary ApplePS2SmartTouchPad, already patched in this repo (otherwise the driver reports unsupported model):
```
Offset    Original  Patched
0000ABF5  72        EB
0000AC2D  01        04
```
Disabled devices
- WWAN (no module)
- Trackpoint (can be enabled when using VoodooPS2Controller.kext)
Untested devices
- SD card reader
- Fingerprint scanner
- Thunderbolt 3 (USB type-c works)
Firmware Revisions
- BIOS version 1.26

(Important) You need to generate a proper config.plist with unique serial numbers:
- Run ./tools/gen.sh (macOS) or tools\gen.bat (Windows) to generate config.plist.
- Add -f or --force flag to forcibly regenerate config.plist with new serial numbers.
All SSDT hotpatches are located at EFI/CLOVER/ACPI/dsl. You can update the compiled .aml binaries by running update.sh (macOS) or update.bat (Windows).
The SSDT-KBD.aml is tuned for ApplePS2SmartTouchPad.kext. If you want to switch to VoodooPS2Controller.kext, use SSDT-KBD.aml in backup folder instead.