lucysrausch/hoverboard-firmware-hack
New Hoverboard Firmware Hack. Now written from scratch and generally much better.
CGPL-3.0
Issues
- 0
YS-SXT-V4.2 A Board with MM32SPIN06PF Microcontroller
#190 opened by RarRed - 3
Wii Nunchuck no reverse
#153 opened by patrickja - 0
- 0
cant flash via windows
#187 opened by absyaqoob30 - 1
Hoverboard motherboard on 20V battery
#185 opened by mlinka - 5
make: *** [Makefile:145: build/hover.elf] Error 1
#171 opened by Crowerade - 3
Extract one channel.
#183 opened by Kambodia91 - 2
Control wheels separately
#173 opened by yeu-github - 5
Hoverboard problem
#143 opened by moezmahroug - 7
- 4
yst dxt j20 v5.7
#182 opened by zuingo - 2
New version of motherboard
#134 opened by Ilyaprok - 1
- 8
LENZOD Board - Error during firmware update
#152 opened by marco-teixeira - 2
Transp Otter fährt in Schleife vor und zurück...
#179 opened by P-A-Trick - 1
UNKONTROLLIERTE RÜCKWÄRTSFAHRT
#180 opened by P-A-Trick - 1
- 2
Hardware test
#177 opened by papaxiclas - 0
Working Processor swap to STM32 on YST-DXT-J20 V4 Motherboard : no motor control yet
#175 opened by 123JRM - 0
Front/ back with mid rest pot (joystick). Possible?
#174 opened by kris86k - 2
yst dxt j20 v5.5
#169 opened by Rettigran - 3
- 1
possible to use STM32CubeProg to flash the mainboard?
#164 opened by darld - 9
- 2
- 1
Is possible to connect with ReP_AL-3D-Lawn-Mower?
#168 opened by kris86k - 1
yst dxt j20 v5.5
#170 opened by Rettigran - 0
GD32F103 RCT6 CE6W495 AC1702 no
#165 opened by doraorion - 1
Can not connect to target
#160 opened by triballo - 5
Motor Command zero crossing causes disconnect
#162 opened by vamfun - 0
How to read out potentiometer values
#161 opened by John-Ingram - 8
Can control Hoverboard motors with PWM but not PPM
#158 opened by mccgregory - 1
New Board, CPU crash
#159 opened by emente - 0
drive one motor
#157 opened by setaretavakoli - 0
how to charge?
#156 opened by solomondg1 - 2
Overvolting the board?
#154 opened by annoyinganime - 12
PPM/PWM Wiring to Receiver?
#146 opened by mkunz7 - 3
Reverse-engineered schematics pdf link is down.
#149 opened by FirePT - 0
Analog input not working
#150 opened by farev - 9
Mainboard dead after 10 minutes
#141 opened by ACG-TR - 0
Make it go backwards
#148 opened by farev - 2
Are Schematics No Longer Available?
#147 opened by k3nden - 0
hoverboard firmware with foc control
#145 opened by mihaigabriel620 - 2
Weird sound
#140 opened by DAVID9SE - 1
Possible mistake in the reverse engineered schematics?
#142 opened by Forought - 4
Flashing Problem ST-LINK
#139 opened by ACG-TR - 2
For GD32F103 two main boards?
#136 opened by abrarakram19 - 1
Values for Hall-Sensor LowPass-Filter
#138 opened by PaulReichhold - 2
How to hold position?
#137 opened by cohnhead66 - 0
activate Hoverboard gyro sensor with switch
#135 opened by bionic24