lukicdarkoo/rpi-wifi

Issues

• A Few Changes for the Script to Work with Pi Zero 2W and Bullseye

  #35 opened 10 months ago by pmi123
  0

• Ap not started with crontab

  #29 opened 3 years ago by hendinejad
  1

• Raspberry Pi 4, had to remove ctrl_interface

  #32 opened 2 years ago by xiki808
  3

• doesn't work

  #33 opened 2 years ago by PA3DSS
  0

• Missing end quote

  #30 opened 3 years ago by davidmurdoch
  0

• No traffic forwarded to internet

  #19 opened 4 years ago by ddrum2000
  3

• nameserver being set to 127.0.0.1 in /etc/resolv.conf

  #23 opened 4 years ago by st42
  0

• How to uninstall

  #24 opened 4 years ago by Abdull
  0

• Maximum number of clients (STA) that attach to AP?

  #27 opened 3 years ago by mkirk-github
  0

• Can I set ap_ssid ap_password and client_ssid client_password the same?

  #28 opened 3 years ago by chilman408
  0

• Support for Raspberry Pi 3

  #11 opened 5 years ago by MkLHX
  17

• 1. Line 89. 2. Dhcpd vs dhcpd5

  #21 opened 4 years ago by katzurki
  1

• Turn off power management

  #13 opened 5 years ago by cyp-git
  2

• Unable to open a new ssh connection after running script

  #18 opened 4 years ago by Xopher00
  0

• Access the RPI from the WLAN0 not possible

  #10 opened 5 years ago by dop0qob
  2

• WLAN0 not connecting to broader internet

  #15 opened 4 years ago by xthursdayx
  1

• Error check passphrase length

  #17 opened 4 years ago by brettbeeson
  0

• OpenVPN breaks client mode

  #16 opened 4 years ago by 43y3s
  1

• can't connect after reset hostname

  #20 opened 4 years ago by hyansuper
  0

• Feature Request: Accept a list of clients from file

  #9 opened 4 years ago by BinaryShrub
  2

• ssh and RDP via MyAP

  #2 opened 4 years ago by HenriApperloo
  2

• WLAN0 is not staying connected

  #6 opened 4 years ago by aidbish
  2

• AP only shows up on wifi list briefly

  #14 opened 5 years ago by jmgwynn
  0

• Installation Fail on raspbian buster - Pi Zero W

  #8 opened 5 years ago by niemes
  2

• NO_INTERNET flag is undefined

  #7 opened 5 years ago by dalgibbard
  0

• which settings i need to change, to not rout internet to connected device

  #4 opened 6 years ago by futechiot
  3

• Range should be [0-9] not [1-9]

  #5 opened 6 years ago by starlino
  0

• how to set static Ip?

  #1 opened 6 years ago by 3bu1ihub
  0