Issues
- 0
Is this system compatible (or can it be, if do some changes) with BIQU Hermit Crab?
#201 opened by btlucas - 0
Typo in double corner pulley assembly instructions
#200 opened by ademuri - 0
Error in Z-Axis stepper motor labels in wiring diagram for Duet 3 Mini + 3HC Expansion boards
#199 opened by strellko - 0
- 0
Wrong hole size for heat sets
#195 opened by MartinVoelz - 0
Baby Bullet BOM update
#194 opened by kingjamez - 0
Baby Bullet Threaded Version Bolt Length update
#193 opened by kingjamez - 0
STEP files for toolholder are out of date.
#192 opened by TypQxQ - 3
Baby Bullet, wiring diagram
#189 opened by kelliead - 2
- 0
BOM Mandala Rose Works links update
#187 opened by ptitmickey - 2
- 2
X Axis Hard Stop
#180 opened by Poofjunior - 1
typo error: S"bed_temp" should be P"bed_temp"
#183 opened by zaum - 1
RRF3 cinfig.g bed thermistor missing " Y"thermistor"
#182 opened by EBLux - 1
Rails are Hard to Align
#181 opened by Poofjunior - 2
- 1
Wiring diagram, Z motors
#175 opened by kelliead - 0
Built Plate Assembly instructions PDF - clarify where mag sheet and heater go
#178 opened by kelliead - 0
RRF3 config tiny reorganize
#177 opened by grzesiekn - 6
Fix Z-probe default Z-offset for RRF2 and RRF3
#168 opened by HaythamB - 0
- 1
rrf3 home macro fix
#156 opened by grzesiekn - 0
Parking post note is wrong
#173 opened by Poofjunior - 1
- 3
Duet 2/RRF3 Config.g mixes up PT100/PT1000
#145 opened by FL-CDF - 3
- 1
Better anti-spam filtering needed on Jubilee3d.com
#141 opened by HaythamB - 1
Threadlock Required on Twist Lock in XY Assembly
#154 opened by Poofjunior - 1
- 1
XY Frame Assembly instructions PDF corrections
#170 opened by kelliead - 1
parts with heat set inserts PDF - update
#159 opened by kelliead - 1
Electronics Panel Assembly instructions PDF updates
#169 opened by kelliead - 1
- 1
Toolchanger Lock Assembly PDF - updates
#164 opened by kelliead - 1
Double Pulley Corner Plate assembly PDF - update
#163 opened by kelliead - 1
Fastener reference sheet PDF - needs update
#160 opened by kelliead - 1
Motor Specs in Instructions are wrong.
#146 opened by Poofjunior - 0
Questions in the file config.g
#171 opened by xiaoxiaobai1986 - 3
- 0
- 0
T8x2 Config Speed/Accel setting is too aggressive
#155 opened by Poofjunior - 0
Right Motor Spacer could benefit from Wire Tunnel
#153 opened by Poofjunior - 0
- 1
Hightemp3D BOM links out of date
#151 opened by Smurgenblurfer - 0
CAD - Bondtech BMG model error
#149 opened by moyerek - 0
CAD - Model of V6 Hotend to Short
#148 opened by moyerek - 1
Back Bed Motor Should have 12mm screws
#142 opened by Poofjunior - 0
LDO Leadscrew nuts require some changes
#147 opened by Poofjunior - 1
Duet2/RRF3 Bed.g has inverted probing sequence regarding config.g Z drive declaration
#144 opened by FL-CDF