matsstaff/stc1000p

Issues

• STC1000 with 78F9224 / 78K0S processor supported?

  #110 opened 3 years ago by WolfganP
  2

• Off-Grid Solar Refrigerator

  #109 opened 3 years ago by mbr1989
  8

• Change Probe with 10K 3950

  #108 opened 4 years ago by tava999
  5

• millisx60 should be reset when updating dh config value

  #107 opened 4 years ago by fredericsureau
  2

• 433MHz FO post-preamble gap

  #106 opened 5 years ago by plsecker
  1

• Controlling STC1000p with COM over internet (by writting to EEPROM)

  #104 opened 6 years ago by sveco86
  3

• New A400-p PCB from ALiExpress "U-Control"

  #68 opened 9 years ago by hidara2000
  10

• build error

  #105 opened 6 years ago by sveco86
  4

• RFXcom

  #103 opened 6 years ago by guan57
  0

• The link to the STC-1000 on AliExpress is dead

  #102 opened 6 years ago by leogout
  1

• support for Holtek HT66F40 (Lerway) based models

  #100 opened 7 years ago by dt
  2

• E-1000 compatibility

  #101 opened 7 years ago by FredrikH-R
  1

• looping

  #99 opened 8 years ago by Badfraggle
  4

• OVBSC - Relay repeatedly ON/OFF every ~4 seconds

  #98 opened 8 years ago by dboyd13
  1

• OVBSC: not entering thermostat mode when strike temperature reached

  #90 opened 8 years ago by karlp
  7

• OVBSC Whirlpool Step

  #92 opened 9 years ago by flynut
  2

• Selectable Output for Mash Steps

  #97 opened 8 years ago by kaljade
  0

• S0 too powerful for ramping between mash steps

  #96 opened 8 years ago by karlp
  3

• More information needed to wire up pump control with the dimmer on OVBSC README

  #95 opened 8 years ago by diablothe2nd
  1

• Minute: Setpoint not updated in thermostat mode

  #94 opened 8 years ago by matsstaff
  0

• OVBSC Separate SO (Strike Output) Variable Into Two Variables

  #93 opened 9 years ago by flynut
  1

• OVBSC cooling step?

  #91 opened 9 years ago by matsstaff
  0

• Negative temperatures in 433MHz

  #89 opened 9 years ago by matsstaff
  0

• Improve 'button up' information in OVBSC

  #86 opened 9 years ago by matsstaff
  2

• Com example sketch has broken menu handling

  #83 opened 9 years ago by matsstaff
  1

• second temperature probe inquiry

  #73 opened 9 years ago by seanmcveigh
  9

• Conditional inclusion C/F HEX data in sketch.

  #74 opened 9 years ago by matsstaff
  1

• Compilation fails on newer versions of Arduino IDE

  #72 opened 9 years ago by matsstaff
  1

• use Spark core

  #71 opened 9 years ago by bateau84
  1

• Get Device ID error message

  #70 opened 9 years ago by CNevay
  2

• Dual Probe_Minute program

  #69 opened 9 years ago by capt9859
  1

• Buttons reversed

  #67 opened 9 years ago by hebs
  2

• Bump up hysteresis limits a smidge more

  #44 opened 9 years ago by matsstaff
  0

• Make SP first menu item

  #61 opened 9 years ago by matsstaff
  1

• STC1000 version using N96A8211 conversion to PIC 16F1828 is possible.

  #63 opened 9 years ago by anil001
  1

• User defined temperature display

  #62 opened 9 years ago by kaljade
  1

• Suspicious RANGE() function

  #52 opened 10 years ago by ArtMilburn
  3

• Move ramping to dh parameter

  #49 opened 10 years ago by matsstaff
  1

• ITC-1000 Compatibility

  #50 opened 10 years ago by DoomsDayBrewery
  1

• uart/serial interface

  #51 opened 10 years ago by beikeland
  1

• Remove 'soft off' functionality in favor of run mode 'off'

  #43 opened 10 years ago by matsstaff
  1

• Upper limit for second temp probe

  #45 opened 10 years ago by ThroughTheLookingGlass
  2

• Aid

  #48 opened 10 years ago by Kingaling04
  1

• Drop one profile, to be able to add more settings and make profiles more versatile

  #42 opened 10 years ago by matsstaff
  1

• Looks like I got a new hardware version

  #47 opened 10 years ago by misin4mati0n
  0

• Custom temperature threshold alarm?

  #35 opened 10 years ago by ct16k
  7

• EEPROM wear leveling?

  #33 opened 10 years ago by matsstaff
  1

• Indicate 'off' mode when power is applied

  #34 opened 10 years ago by matsstaff
  1

• Garbled display when applying power to a unit in soft off mode

  #38 opened 10 years ago by matsstaff
  1

• Should BOTH delays be reset when either relay is turned off.

  #32 opened 11 years ago by matsstaff
  0