mjrice/Wilson2

Issues

• Im2596-mount.stl

  #16 opened 3 years ago by feenix3k
  1

• Coupler 5x8 removed?

  #35 opened 3 years ago by damccull
  1

• Loose fitting x pieces

  #30 opened 5 years ago by tbd-develop
  1

• error firmware

  #39 opened 6 years ago by Rosuu
  0

• Tensioner bad bore

  #38 opened 6 years ago by mexbravo
  1

• Holes in bottom on Y motor/idler

  #37 opened 6 years ago by timmit99
  0

• Z rods ~5mm too short

  #24 opened 7 years ago by thatch
  5

• Parametric Parts List needs modifying for rack & pinion flip down Z-probe

  #34 opened 8 years ago by dtbee
  0

• Modify parts to use 8mm Smooth Rod

  #33 opened 8 years ago by iguanahotsauce
  0

• Error in Z calculation - Wilson II BOM

  #32 opened 8 years ago by WZ9V
  0

• Upgrade to Full Graphic Smart Controller

  #31 opened 9 years ago by vchan3m
  0

• Missing screw/nut from BOM

  #29 opened 9 years ago by hopping-cricket
  0

• MDF Print Deck 200x300 heated bed size mismatch

  #25 opened 9 years ago by tempestnano
  1

• Current xcarriage causes rod deflection, binding?

  #22 opened 9 years ago by elijahsgh
  1

• Issue slicing new z-lower-brace-1 and z-lower-brace-2

  #18 opened 9 years ago by elijahsgh
  5

• Question about extruder filament path

  #11 opened 9 years ago by ulmeck
  1

• Orientation of PSU holder

  #19 opened 9 years ago by elijahsgh
  1

• Y ends have oversize holes for 10mm rods

  #15 opened 9 years ago by hasbridge
  3

• Lead screw length is not a formula in the BOM

  #21 opened 9 years ago by elijahsgh
  7

• Lead Screw Drive All Axis

  #20 opened 9 years ago by glennswest
  0

• Power Supply Mount

  #10 opened 9 years ago by timmit99
  1

• Missing extruder fan duct

  #5 opened 9 years ago by WardBenjamin
  2

• 624rs bearing = 624-2rs?

  #14 opened 9 years ago by tempestnano
  2

• z endstop stl file missing

  #13 opened 9 years ago by ArunKalahasti
  0

• [Question] SCAD file of every part?

  #12 opened 9 years ago by andreq
  2

• Missing switch and leadscrew nut

  #3 opened 9 years ago by timmit99
  0

• Z endtop

  #8 opened 9 years ago by timmit99
  1

• No amount for Y tensioner part in BOM

  #7 opened 9 years ago by WardBenjamin
  1

• Make filenames exactly match BOM, or add filenames to the BOM

  #6 opened 9 years ago by WardBenjamin
  1

• Missing switch and leadscrew nut

  #4 opened 9 years ago by timmit99
  0

• Video build tutorial

  #2 opened 9 years ago by WardBenjamin
  1

• Usability, Compairison to TS, ETA to Stable

  #1 opened 9 years ago by WardBenjamin
  1