mrRobot62/GCodeGenerator_Geometricals

Issues

• Millingparameters (millingparameters.json)

  #20 opened 6 years ago by ergerd
  2

• surface_milling_a_spiral

  #9 opened 6 years ago by ergerd
  11

• "python , GCode" should be "python, GCode" in the GitHub repository description

  #19 opened 6 years ago by matkoniecz
  1

• Allgemein: Spindel/Fräsmotor

  #10 opened 6 years ago by ergerd
  3

• mill_pocket_circle: Angabe von Raduis inner scheint keine Wirkung zu haben

  #16 opened 6 years ago by ergerd
  12

• Bedienung des GCodeGenerators - Kein Refresh des Dialoges bei erneuter Auswahl aus Menü

  #11 opened 6 years ago by ergerd
  3

• mill_round_rectangle_pocket: Anfangstiefe nicht berücksichtigt

  #15 opened 6 years ago by ergerd
  5

• GCodeGenerator - Quit funktioniert nur noch über Menü, Versionsnummer anzeigen

  #18 opened 6 years ago by ergerd
  5

• contourCircle: no real user input validation implemented

  #7 opened 6 years ago by mrRobot62
  1

• contourCircle : CenterX/Y is not used/calculated in geocode

  #4 opened 6 years ago by mrRobot62
  0

• mill_round_rectangle_pocket: Fertig?

  #13 opened 6 years ago by ergerd
  4

• drill_holes_in_a_grid: Wörtlich zu verstehen

  #17 opened 6 years ago by ergerd
  1

• mill_circle_pocket: Es wird nur die äußere Kontur angefahren. Keine inneren

  #14 opened 6 years ago by mrRobot62
  1

• surface_milling_a_rectangle: Y-Achse

  #12 opened 6 years ago by ergerd
  5

• contourCircle: In post amble wrong F-Value for Z axis (used speed from XY)

  #6 opened 6 years ago by mrRobot62
  1

• contourArc: CoordinateCenter #1 not correctly implemented

  #8 opened 6 years ago by mrRobot62
  1

• contourCircle: G03 implementation failure

  #5 opened 6 years ago by mrRobot62
  0

• pocketRoundRectangle.py - ignoring cutter compensation at start position

  #2 opened 6 years ago by mrRobot62
  0

• drillHolesGrid.py - OffsetX not usable if a grid angle is set

  #3 opened 6 years ago by mrRobot62
  0

• contourMillHolesGrid.py - postamble sequence missing

  #1 opened 6 years ago by mrRobot62
  1