ned-kelly/docker-voltronic-homeassistant
Programmatically read data from your Voltronic, Axpert, Mppsolar PIP, Voltacon, Effekta etc Inverter and send it to Home Assistant via MQTT - Works with RS232 & USB!
C++GPL-3.0
Issues
- 4
- 6
Dual MPPT not showing PV2 at all
#66 opened by GastonJ - 5
- 0
- 0
Corrupt or missing data?
#115 opened by avfoto - 1
impossible to compile on raspberry OS bookworm
#114 opened by tripunto - 11
Help with setting up the right Values
#63 opened by 1onord - 0
Easun Power 3.2 SGH II : can't find values for
#113 opened by carmelo42 - 1
Could it be that the installation instructions no longer fit the current Home Assistant?
#112 opened by moscito1010 - 23
No data from ttyUSB0 at all?
#57 opened by UV-PWRD - 0
no influxdb import. any idea?
#111 opened by moscito1010 - 0
Is it possible to poll inverter directrly via WiFi?
#110 opened by charger - 0
Mpp Solar , MPI 10k HAOS?
#109 opened by Raydox187 - 10
How to Start the MQTT
#56 opened by shanrahul - 0
wron prjekt, sorry.
#107 opened by moscito1010 - 1
Support of P17 InfiniSolar 5KW protocol
#59 opened by blacksocket - 2
- 6
Incorrect start/stop size
#92 opened by dominikamann - 0
poller examples please :D
#105 opened by Edgepath - 2
Integration fail
#103 opened by Xcpro1 - 0
Pylontech battery support
#104 opened by SilverNodashi - 1
- 1
Missing file /etc/Inverter/mqtt.json
#102 opened by crazypaddo - 2
utilizzo su openhab
#100 opened by pin32 - 1
Install on Raspberry SO (bullseye)
#99 opened by tripunto - 1
Installing this tool in Home Assistant operating system - Docker possibly missing
#98 opened by jumajazu2 - 13
inverter_poller timeout too short?
#90 opened by degreal - 0
- 3
USB read working, but USB2Serial doesn't
#93 opened by avfoto - 1
All Detected Sensors Show as Unknown
#94 opened by Boney35y - 5
HomeAssistant Auto Discovery Not Working
#88 opened by eloquentvogon - 34
7.2 Voltronic Max with x2 MPPT
#60 opened by Sarelseekat - 1
- 1
Data refresh on InfluxDB
#91 opened by avfoto - 0
Get data into Grafana
#89 opened by codefreak558 - 2
- 4
- 2
can it support phocos inverters?
#62 opened by test2a - 0
Tautology in inverter-cli/main.cpp
#68 opened by dilyanpalauzov - 1
Help with Grafana dashboard
#80 opened by andriuskr - 2
- 1
- 3
Possible values for QPIRI and QPIWS: VOLTRONIC AXPERT INVERTER 3KW (2021)
#51 opened by EduardTheThird - 1
run_interval not working 🤔
#78 opened by desegura - 3
Always Receiving 0 byte responses
#73 opened by Jaysun11 - 4
inverter_poller prints not plausible value for Battery_redischarge_voltage
#71 opened by dilyanpalauzov - 2
INVERTER: QPIRI: incorrect start/stop bytes.
#67 opened by dilyanpalauzov - 4
7.2 Voltronic Max - load_watthour not working
#65 opened by jraydoran - 3
Not working voltronic 8000 max
#55 opened by audio-catalyst - 0
Each Poll Switches Inverter to Battery Mode
#54 opened by GuyFace