nordseele/hans

Issues

• Hardware Schematic/Board Files

  #8 opened 3 years ago by toneburst
  1

• The boot time of RPI Zero W is approx. 50 seconds.

  #2 opened 4 years ago by nordseele
  1

• If follower is not connected to the i2c bus, Hans will crash

  #5 opened 4 years ago by nordseele
  1

• Hans only sends "setters" and cannot retrieve from modules aka. "getters"

  #3 opened 4 years ago by nordseele
  0

• ⚠️ RPI prevents the ER-301 from booting up normally, they need to start simultaneously

  #1 opened 4 years ago by nordseele
  2