nutechsoftware/alarmdecoder

Issues

• AlarmDecoder & NuTech Company Offline?

  #74 opened a month ago by erikson1970
  0

• No further Debian Buster Security Updates as of September 10th, 2022

  #71 opened 2 years ago by edrikk
  3

• Python 3.12 changes in regex special characters

  #73 opened 9 months ago by giachello
  0

• Zones alternate on and off

  #72 opened a year ago by egite
  0

• AD2PI firmware failure - attempting to recover

  #70 opened 2 years ago by Nu11u5
  6

• Emulate smoke / co virtual zone

  #69 opened 3 years ago by mcnutter1
  7

• AlarmDecoder API status requests return multiple duplicate messages

  #67 opened 3 years ago by gdavids57
  11

• Zone fault expiration period too short for Vista 128 with 41 zones

  #68 opened 3 years ago by mitchmitchell
  0

• Parsing error of older firmware 2.2a.8.6 causes exception.

  #39 opened 5 years ago by f34rdotcom
  4

• Inefficient socket reading causes failures in home assistant

  #66 opened 3 years ago by TD22057
  3

• ValueError: file descriptor cannot be a negative integer (-1)

  #64 opened 3 years ago by ratsputin
  0

• AlarmDecoder thinks faulted zone is momentarily restored when a function key is pressed

  #46 opened 5 years ago by melyux
  5

• Vista20SE Expander Zones Report as Wrong Zone Number

  #61 opened 4 years ago by krkeegan
  0

• AlarmDecoder reports non-existent restore/fault events

  #54 opened 4 years ago by dssinger
  2

• test failure (python3 related?)

  #45 opened 5 years ago by colemickens
  5

• serial_device read_line() does not parse lines correctly

  #40 opened 4 years ago by mstovenour
  9

• Communicator failures not handled

  #59 opened 4 years ago by jjlawren
  1

• _handle_config() throws error on certain data values - 1.13.9

  #47 opened 4 years ago by ajschmidt8
  14

• Expander Zones Are Reported in Messages

  #51 opened 4 years ago by krkeegan
  1

• New Alphanumeric Zone Fault Can Temporarily Cause Other Faulted Zones to Incorrectly Report as Ready

  #50 opened 4 years ago by krkeegan
  1

• system fault bit can be '-'

  #49 opened 5 years ago by squiddity
  3

• AlarmDecoder thinks there is a fire when a fire sensor is removed (FAULT message)

  #48 opened 5 years ago by talsalis
  3

• pyserial requirements.txt breaks homeassistant

  #43 opened 5 years ago by garbled1
  6

• Localized panel ROMs not working

  #42 opened 5 years ago by sergio303
  1

• Feature Request: Add armed instant status

  #34 opened 5 years ago by HeySideburns
  4

• Inconsistent states given to each event based upon when it was parsed.

  #24 opened 7 years ago by f34rdotcom
  1

• If we ignore processing of states we still process fire state?

  #21 opened 5 years ago by f34rdotcom
  1

• AD2 Ready Open

  #32 opened 5 years ago by j3tang
  12

• Build 1.13.5 and publish to pypi

  #33 opened 6 years ago by jonathanjsimon
  5

• Needs to be default to a string of "Unknown" it is not a numeric variable

  #35 opened 6 years ago by f34rdotcom
  0

• Alarm Decoder Disconnect - Related to Home Assistant?

  #25 opened 6 years ago by SP410
  10

• Notification Section in WebSever Bug saving settings

  #28 opened 6 years ago by WilsonBradley
  0

• pip install is wrong version

  #26 opened 7 years ago by wlscanada
  1

• UnicodeDecodeError in multiple places

  #11 opened 7 years ago by tagdara
  6

• LRR Events crossing partitions updateing AlarmDecoder state incorrectly.

  #20 opened 7 years ago by f34rdotcom
  1

• Fire state tracking has timeout?

  #22 opened 7 years ago by f34rdotcom
  1

• Delayed or never seeing messages if state does not change at startup of app.

  #23 opened 7 years ago by f34rdotcom
  0

• Please upload 0.13.1 to pypi

  #18 opened 7 years ago by PhracturedBlue
  5

• Decoder sends multiple events if open is called more than once

  #15 opened 7 years ago by TD22057
  8

• is the API stable?

  #13 opened 7 years ago by jmgurney
  1

• on_alarm and on_alarm_restored zone type?

  #10 opened 7 years ago by TD22057
  1

• Error in on_arm documentation

  #9 opened 7 years ago by TD22057
  3

• ERROR: Error sending notification for Alarm Update:

  #8 opened 8 years ago by jboyd170
  2

• "Events" log (zone events) log with UTC timestamps despite setting timezone

  #6 opened 8 years ago by melyux
  1

• The new responsive design seems to miscalculate mobile screen width

  #7 opened 8 years ago by melyux
  3