NXP Application Code Hub

How to enable a LVGL cluster demo with i.MX RT1170-EVK.

This is a cluster demo with LVGL on MIMXRT1170-EVK with RK055HDMIPI4M 5.5" LCD panel. This demo shows the interface of the car/e-bike when driving, shows the interface of speedometer gear switching and signal icons switching.

Boards: MIMXRT1170-EVK

Categories: Graphics, RTOS

Peripherals: DISPLAY

1. Software

This project based on SDK 2.12.1.
LVGL version 8.2.0.

2. Hardware

3. Setup

3.1 Step 1

Connect the LCD panel to connector J48 of i.MX RT1170-EVK board.

3.2 Step 2

Open the IAR project from \lvgl_cluster_rt1170_evk\sdk\iar.

3.3 Step 3

Download the built project to the board and run the example.

4. Results

When the demo runs correctly, we will see the following interfaces.

5. FAQs

6. Support

Project Metadata

Questions regarding the content/correctness of this example can be entered as Issues within this GitHub repository.

Warning: For more general technical questions regarding NXP Microcontrollers and the difference in expected funcionality, enter your questions on the NXP Community Forum