Pinned Repositories
an-vglite_porting_imxrt
This application outlines the software structure of vglite middleware, analyzes current driver code to support multitask, then gives the details on how to port vglite middleware for bare metal and single task. The ported source code and its examples are provided.
ap-conversa-voice-calling
This software pack helps developers to build products that enable a complete voice call application using NXP’s MCU and Conversa Voice Suite. This project speeds up the evaluation of Voice over Internet Protocol (VoIP) products and provides sufficient audio quality required to meet the Microsoft Teams specification and receive certification.
ap-ml-person-detector
This software pack helps developers build products that are required to detect people using NXP’s i.MX RT1170 crossover MCU and eIQ® ML Software Development Environment. This project includes tested algorithms for Vision Intelligence (uVITA) and provides production quality software for customers to include in their end products.
ap-ml-state-monitor
This software pack enables developers to develop and deploy neural networks on MCU-based systems for building smart sensing applications. This example shows how to use ML to create a fan vibration state monitoring solution.
ap-qmc2g-industrial
The Industrial Drive Development Platform shows how a single i.MX RT1176 Crossover MCU can control up to four different motors, while managing wired or wireless connectivity and an HMI interface.
dm-low-power-implementation-mcxa153
The low power implementation demo is used for power mode switch, wake up time measurement and low power current measurement on the FRDM-MCXA153 board.
dm-mcxn947-power-manager
The Power Manager example uses runtime menus to evaluate power modes power management features of MCX Nx4x.The example also uses the Power Manager component of MCUXpresso SDK, which provides a common framework of APIs for power management. For more details how to use this example , measure current, refer lab guide "MCXNx4x Power Management Lab.pdf"
dm-on-device-training-fan-anomaly-on-mcxn947
On-device trainable anomaly detection base on MCX platform
dm-rt1170evkb-full-appliance
This is a Full Appliance Demo with LVGL on MIMXRT1170-EVKB with RK055HDMIPI4M 5.5" LCD panel. This Demo shows three appliances, an Oven, an Aircon and a Hood (each appliance has its own animations and can switch bettwen screens), it also has a central dashboard with the status of all appliances.
gs-vglite_examples_rt1170
The VGLite examples show how to draw graphics assets using VGLite API.
nxp-appcodehub's Repositories
nxp-appcodehub/dm-low-power-implementation-mcxa153
The low power implementation demo is used for power mode switch, wake up time measurement and low power current measurement on the FRDM-MCXA153 board.
nxp-appcodehub/dm-on-device-training-fan-anomaly-on-mcxn947
On-device trainable anomaly detection base on MCX platform
nxp-appcodehub/an-fxls8974cf-low-power-wake-up-examples
This software describes how to configure SDCD block of FXLS897xCF sensor to enable low-power motion wake-up in interrupt mode and use auto-wake/sleep feature to autonomously put the sensor back to low-power sleep mode when no-motion is detected for configured auto-sleep timer.
nxp-appcodehub/ap-dvs-pvt-sensor
This repository holds the Dynamic Voltage Scaling Using PVT Sensor Pack and depends on the MCUXpresso SDK overall delivery. This application software pack helps NXP customers quickly reduce power and increase battery life leveraging the integrated PVT sensor in the i.MX RT500. The complete software solution is provided in an easy to use pack targeted for use in MCUXpresso IDE.
nxp-appcodehub/dm-mcxn236-camera-interface-by-smartdma
This demo introduces a parallel interface for the camera solution for MCXN236
nxp-appcodehub/dm-ml-ir-sensor-people-counting
This shows how to create a deep learning model to count the number of people in a room using a low-resolution 8x8 infrared array sensor.
nxp-appcodehub/dm-mpl3115-pressure-altimeter-examples
This example demo describes how to configure absolute pressure sensor MPL3115 for pressure and altimeter mode. This sensor can find use in many industrial, medical applications.
nxp-appcodehub/dm-nmh1000-magnetic-switch-example
This demo describes how to configure NMH1000 magnetic switch sensor to enable magnetic wakeup usecase. Such usecase can find many applications where user would like to completely shut off power supply or put the device in power down mode based on magnetic field applied. Eg include, smart meters, shelf labels, reed switch replacement, smart home etc
nxp-appcodehub/gs-smart-panel-rm67162-rt1170
This software displays a tiger on the smart lcd panel rm67162, in which the primary core uses vglite to draw contents and the secondary core sends image data to the panel.
nxp-appcodehub/ap-basic-matter-ready-connected-hmi
NXP's cost-optimized MCU (FreeRTOS) platform enables Matter-ready edge node development with Wi-Fi 4, Thread, and BLE 5 wireless connectivity protocols using i.MX RT1060 MCU, K32W0x MCU, and 88W8801 Wi-Fi SoC.
nxp-appcodehub/.github
nxp-appcodehub/an-flexio-emulating-uart-with-irda
This software accompanies application note[AN14319], which describes how to implement emulating UART with IRDA by using FlexIO.
nxp-appcodehub/an-lpc802_io_expander
This application note introduces how to use LPC802 as I/O expander via the I2C-bus interface. Please refer to AN12126 for complete instructions on how to use this software.
nxp-appcodehub/an-usb-to-can-adaptor-mcxn947
USB to CAN-FD adaptor where the USB data retransmit to CAN-bus and vice versa.
nxp-appcodehub/an-usb-to-multi-vcom-on-mcxc444
usb-to-multi-vcom-on-mcxc444
nxp-appcodehub/an-using-slcd-controller-on-mcxc444
an-using-slcd-controller-on-mcxc444
nxp-appcodehub/dm-freemaster-fxls89xxxf-evaluation-gui-firmware
This example demonstrates combining ISSDK and FreeMASTER to create FXLS89xxxF 3-axis accelerometer evaluation GUI for our customer to evaluate this sensor using sensor development tools with sensors expansion boards.
nxp-appcodehub/dm-freemaster-nmh1000-evaluation-gui-firmware
This example demonstrates combining ISSDK and FreeMASTER to create NMH1000 magnetic switch evaluation GUI for our customer to evaluate this sensor using sensor development tools with sensor expansion boards
nxp-appcodehub/dm-industrial-panel-frdm-mcxn947
This demo demonstrate capabilities of new FRDM-MCXN947. With only one core, the demo run motor control, lvgl, server, two temperature sensors, touch sensitive and get core performance.
nxp-appcodehub/dm-low-power-measurement-on-mcxn236
The low power measurement demo is used to reproduce the power consumption and wake-up time in the datasheet on the FRDM-MCXN236 board.
nxp-appcodehub/dm-mcx-accel-and-pressure-monitor
This demo shows how to integrate the NXP sensors FXLS8974CF (3-axis accelerometer) and MPL3115 (absolute pressure) with FRDM-MCXN947 platform. Both sensors share the I2C bus of the Accel & Pressure click board, that is used in the demo for digital communication between the MCXN947 and the sensors.
nxp-appcodehub/dm-mcxn-touch-keypad-tuning
The demo shows how to use NXP Touch sensing library with the python tool for Capacitive Touch keypad sensitivity tuning
nxp-appcodehub/dm-ml-openart
OpenART is an open source AI Develop kit base on NXP MCU, which supported most popular engines: TFlite-Micro, CMSIS-NN, Glow and OpenMV&Micropython as well.
nxp-appcodehub/dm-multiple-person-detection-on-mcxn947
nxp-appcodehub/dm-nxp_mcu_easy_bootloader
Simplified version of NXP official MCUBOOT, implemented in C, removing most of the features and only retaining serial download functionality.
nxp-appcodehub/dm-p3t1085uk-temperature-sensor-driver-with-demo-app
This example demo describes how to configure the accurate temperature sensor P3T1085UK for temperature measurement. This sensor can be used in many industrial and medical applications.
nxp-appcodehub/dm-pca9957hn-led-driver-with-demo-app
A graphical interface allows the user to easily explore the different functions of the driver to use the LED controller features for color mixing, blinking and dimming LEDs.
nxp-appcodehub/dm-pcf2131-real-time-clock-driver-with-demo-app
This example demo provides CMSIS Compliant APIs to configure different operating modes of PCF2131 RTC.
nxp-appcodehub/dm-rt685-evk-i2s-loopback-with-audio-codec
The example enables I2S+DMA for audio path and brings up WM8904 via I3C/I2C. The project includes WM8904 simple driver using I3C/I2C communication for configuration. Because of that, I3C/I2C device nodes are described in the board overlay file.
nxp-appcodehub/gs-motor-control-application-framework
This software introduces framework with peripherals, interrupts and additional resources for developing motor control application with LPC55S3x/553x EVK with NXP low voltage PMSM board. It is easy to port to any custom board and debug by using FreeMASTER tool