Pinned Repositories
an-vglite_porting_imxrt
This application outlines the software structure of vglite middleware, analyzes current driver code to support multitask, then gives the details on how to port vglite middleware for bare metal and single task. The ported source code and its examples are provided.
ap-conversa-voice-calling
This software pack helps developers to build products that enable a complete voice call application using NXP’s MCU and Conversa Voice Suite. This project speeds up the evaluation of Voice over Internet Protocol (VoIP) products and provides sufficient audio quality required to meet the Microsoft Teams specification and receive certification.
ap-ml-person-detector
This software pack helps developers build products that are required to detect people using NXP’s i.MX RT1170 crossover MCU and eIQ® ML Software Development Environment. This project includes tested algorithms for Vision Intelligence (uVITA) and provides production quality software for customers to include in their end products.
ap-ml-state-monitor
This software pack enables developers to develop and deploy neural networks on MCU-based systems for building smart sensing applications. This example shows how to use ML to create a fan vibration state monitoring solution.
ap-qmc2g-industrial
The Industrial Drive Development Platform shows how a single i.MX RT1176 Crossover MCU can control up to four different motors, while managing wired or wireless connectivity and an HMI interface.
dm-low-power-implementation-mcxa153
The low power implementation demo is used for power mode switch, wake up time measurement and low power current measurement on the FRDM-MCXA153 board.
dm-mcxn947-power-manager
The Power Manager example uses runtime menus to evaluate power modes power management features of MCX Nx4x.The example also uses the Power Manager component of MCUXpresso SDK, which provides a common framework of APIs for power management. For more details how to use this example , measure current, refer lab guide "MCXNx4x Power Management Lab.pdf"
dm-on-device-training-fan-anomaly-on-mcxn947
On-device trainable anomaly detection base on MCX platform
dm-rt1170evkb-full-appliance
This is a Full Appliance Demo with LVGL on MIMXRT1170-EVKB with RK055HDMIPI4M 5.5" LCD panel. This Demo shows three appliances, an Oven, an Aircon and a Hood (each appliance has its own animations and can switch bettwen screens), it also has a central dashboard with the status of all appliances.
gs-vglite_examples_rt1170
The VGLite examples show how to draw graphics assets using VGLite API.
NXP Application Code Hub's Repositories
nxp-appcodehub/ap-ml-state-monitor
This software pack enables developers to develop and deploy neural networks on MCU-based systems for building smart sensing applications. This example shows how to use ML to create a fan vibration state monitoring solution.
nxp-appcodehub/dm-low-power-implementation-mcxa153
The low power implementation demo is used for power mode switch, wake up time measurement and low power current measurement on the FRDM-MCXA153 board.
nxp-appcodehub/dm-rt1170evkb-full-appliance
This is a Full Appliance Demo with LVGL on MIMXRT1170-EVKB with RK055HDMIPI4M 5.5" LCD panel. This Demo shows three appliances, an Oven, an Aircon and a Hood (each appliance has its own animations and can switch bettwen screens), it also has a central dashboard with the status of all appliances.
nxp-appcodehub/an-hd_camera_rt1050
This HD camera demo shows how to receive the camera data using CSI driver. In this example, you will see the camera frames shown in the LCD. Optionally, you can touch the LCD panel with you finger, the current frame will be compressed to JPEG format and stored in the microSD card.
nxp-appcodehub/an-lvgl_demo_for_small_mcu
This demo is an example of dashboard for electric bicycle. It is based on LVGL GUI library and GUI Guider. This demo can be used to evaluate GUI performance of NXP part. LPC5506 is used as target MCU with external SPI Flash to store image and font sources. This demo supports various GUI widgets such as meter panel, chart, label.
nxp-appcodehub/an-multiple-usb-audio-formats-on-lpc5500
his application note will show you how to implement multiple USB audio formats on LPC5500 series.
nxp-appcodehub/ap-dvs-pvt-sensor
This repository holds the Dynamic Voltage Scaling Using PVT Sensor Pack and depends on the MCUXpresso SDK overall delivery. This application software pack helps NXP customers quickly reduce power and increase battery life leveraging the integrated PVT sensor in the i.MX RT500. The complete software solution is provided in an easy to use pack targeted for use in MCUXpresso IDE.
nxp-appcodehub/dm-ml-ir-sensor-people-counting
This shows how to create a deep learning model to count the number of people in a room using a low-resolution 8x8 infrared array sensor.
nxp-appcodehub/gs-ml-dry-beans-image-classification-using-eiq
gs-ml-dry-beans-image-classification-using-eiq
nxp-appcodehub/ap-basic-matter-ready-connected-hmi
NXP's cost-optimized MCU (FreeRTOS) platform enables Matter-ready edge node development with Wi-Fi 4, Thread, and BLE 5 wireless connectivity protocols using i.MX RT1060 MCU, K32W0x MCU, and 88W8801 Wi-Fi SoC.
nxp-appcodehub/an-dsp_for_lpc553x_using_pq
AN13498: Digital Signal Processing for NXP LPC553x/LPC55S3x Using PowerQuad
nxp-appcodehub/an-fft_with_pq_and_cmsis_dsp
AN13496: Computing FFT with PowerQuad and CMSIS-DSP on LPC5500
nxp-appcodehub/an-flac-codec-rt685
The FLAC demo application demonstrates how to porting FLAC and evaluation performance on i.MXRT685 evk board.
nxp-appcodehub/an-flexio_camera_rt1010
This example shows how to use FlexIO simulated camera interface to receive camera data, and display the camera frames in a LCD panel.
nxp-appcodehub/an-fw_update_using_sec_bootloader
AN13497: Firmware Update Using Secondary Bootloader
nxp-appcodehub/an-lpc553x-dual-servo-motor-control
This application note describes the dual servo demo with the NXP LPC55S36 processor. It also can be used as a reference for motor control application developing based on other products.
nxp-appcodehub/an-lpc55s36_mc_bldc_whall
This application note describes the implementation of the 3-phase Brushless DC motor (BLDC) control with Hall sensor based on the NXP LPC55S36 processor.
nxp-appcodehub/an-lpc_uart_server
AN12625 Multi-TTY ExpansioUSB to uart sever based on lpc54018 and lpc54608 GitHub topics: industrial
nxp-appcodehub/an-mipi-dsi-screen-pushing-rt500
This document illustrates graphics drawing methods and performance comparisons under different conditions.
nxp-appcodehub/an-pmsm-foc-mcxa153
This application note describes the implementation of sensorless flux oriented control(FOC) application for 3-phase Permanent Magnet Synchronous Motors (PMSM) on the FRDM-MCXA153 board based on the NXP MCXA153 MCU.
nxp-appcodehub/an-uvc_imxrt
This demo application shows how to build a USB video device based on MCUXpresso SDK.
nxp-appcodehub/ap-optimized-voice-ui
This Application Software Pack provides a power optimized application featuring local voice control using NXP's Voice Intelligent Technology (VIT) on the i.MX RT595 Crossover MCU.
nxp-appcodehub/dm-lpc55s36-low-end-audio-demo
This example demo uses DAC output to generate low end audio through an external speaker.
nxp-appcodehub/dm-lpc55s69-fashion-mnist-object-recognition
This demo demonstrates the AI capabilities of the LPC55S69. It displays the image captured by the camera on the LCD screen and performs fashion mnist object recognition.
nxp-appcodehub/dm-lpc55s69-multi-face-detection
This demo demonstrates the AI capabilities of the LPC55S69. It displays the image captured by the camera on the LCD screen and performs face detection.
nxp-appcodehub/dm-lpc860-smart-lighting
This is the source code for using LPC860 as an IEC-62386 compatible smart RGB light bulb, and is the default firmware for the smart lighting control gear board.
nxp-appcodehub/dm-lvgl-vit-rt1060
i.MX RT1060 LVGL Coffee Machine with VIT demo This application code is to demonstrate LVGL Coffee Machine GUI + NXP VIT on RT1060-EVK for smart panel demo
nxp-appcodehub/dm-lvgl_cluster_rt1170_evk
Cluster demo with LVGL on i.MX RT1170-EVK.
nxp-appcodehub/dm-lvgl_cluster_rt1170_evkb_rpi
Cluster demo with LVGL on Raspberry Pi 7" touch panel.
nxp-appcodehub/gs-ml-kitchen-pantry-object-classification
Step-by-step guide for deployment of an object detector model on an MCU-based system. The object detector model is developed by fine-tuning a MobileNet model using transfer learning.