oemof/tespy

Issues

• How to model a warm water tank?

  #565 opened 2 months ago by joppi588
  1

• The `valid` column in the results of the `OptimizationProblem` class should be described more explicitly

  #564 opened 2 months ago by fw-bh
  0

• The `dissipative` attribute in the exergy analysis feature should not come with defaults

  #463 opened 2 months ago by fwitte
  0

• The `dissipative` specification should not be set by default

  #540 opened 2 months ago by fwitte
  1

• Make "_network._reset_topology_reduction_specifications()" a public method

  #520 opened 2 months ago by fwitte
  0

• A method to transform `SimpleHeatExchangers` automatically to `HeatExchangers` might be useful

  #557 opened 3 months ago by fwitte
  0

• Solar Water Heating loop using TESPy

  #555 opened 3 months ago by camilamartinf
  0

• A note should be added to the subsystem docs, that connection and component labels have to be made unique

  #548 opened 3 months ago by Matt-haug
  4

• Old jacobian matrix indexing in user defined equation documentation

  #549 opened 3 months ago by HaSchneider
  1

• Include a best-practice example for workflows integrating tespy models

  #551 opened 3 months ago by fwitte
  0

• Importing network causes crash after saving additional files in the same folder

  #535 opened 5 months ago by lauraariasmendez
  1

• Saturation function cannot be called on mixtures.

  #516 opened 7 months ago by aljubrmj
  6

• The order of pipe input in the add_conns function leads to different calculation results.

  #519 opened 7 months ago by CZRMWMW
  3

• Document model and Logging issues

  #494 opened 10 months ago by quentin1337
  1

• Implementing specified equations into logging

  #500 opened 10 months ago by quentin1337
  2

• There should be a seed to select the generic starting value for mass flow reproducibly

  #509 opened 8 months ago by fwitte
  0

• Thermal Storage as Component

  #423 opened 2 years ago by jubra97
  8

• Missing component in COMP_TARGET_CLASSES

  #508 opened 8 months ago by sertomas
  4

• How can i define the parameters?

  #496 opened 10 months ago by Songyihu
  3

• Choice of inlets of combustion chamber affects simulation convergence

  #482 opened a year ago by tub-hofmann
  1

• Almost stoichiometric combustion calculation with lambda=1.05 fails

  #471 opened a year ago by tub-hofmann
  5

• Allow to model mixtures of gases and liquids as well as CoolProp mixture back-end

  #472 opened a year ago by YoannUniKS
  8

• Fix docs on liquid/gas mixtures

  #475 opened a year ago by fwitte
  1

• The figure of the DropletSeparator is confusing

  #469 opened a year ago by fwitte
  1

• A method to calculate all partial derivatives of a component's equation numerically might be useful

  #465 opened a year ago by fwitte
  0

• It is unclear how to handle specification of species, if only one is missing

  #464 opened a year ago by fwitte
  0

• The Ref class imposes negative value for delta

  #458 opened a year ago by fwitte
  0

• Since version 0.7 pygmo does not work anymore

  #452 opened a year ago by fwitte
  0

• Implement pytest fixtures for paths and replace setup methods

  #454 opened a year ago by fwitte
  0

• Fix drum blowdown

  #450 opened a year ago by fwitte
  0

• Allow more simple unit tests of functions and derivatives calculations for components

  #446 opened a year ago by fwitte
  0

• Infinite looping in fluid propagation

  #424 opened a year ago by 5venNi
  4

• How to add incompressible fluid in connection?

  #422 opened a year ago by AbuHenaToslim
  8

• The `set_attr` methods of components, connections and buses are way to long

  #437 opened a year ago by fwitte
  0

• Integrate various complete models showcasing the capabilities of TESPy in the documentation

  #436 opened a year ago by fwitte
  0

• pkg_resources is depricated

  #412 opened a year ago by fwitte
  0

• Discontinue support for older Python versions

  #429 opened a year ago by fwitte
  0

• Merge setup.py and pyproject.toml

  #431 opened a year ago by fwitte
  0

• key for specific volume in fluid property plotting data of components is `v` instead of `vol`

  #432 opened a year ago by davidpasquale
  4

• How are diagrams drawn

  #428 opened a year ago by tomas789
  1

• Tespy condensing separated gas from Dropletseparator in Condenser

  #426 opened 2 years ago by evaporr
  0

• Fluid property range with different unit than SI in log file

  #417 opened 2 years ago by tboussaid
  3

• Add .converged property to network class

  #418 opened 2 years ago by fwitte
  1

• Description of class Ref has a typo

  #419 opened 2 years ago by fwitte
  1

• Add examples for electrolyzer and fuel cell usage in online documentation section

  #414 opened 2 years ago by fwitte
  0

• The correct placement of the cycler closer -- Add 'note' in doumentation

  #403 opened 2 years ago by maltefritz
  2

• Flexible logging functionality

  #389 opened 2 years ago by jowr
  3

• Calculation of td_log in heat exchangers with constant temperature difference

  #395 opened 2 years ago by fwitte
  1

• Heat exchanger in part load: Singularity in jacobian matrix

  #399 opened 2 years ago by YoannUniKS
  6

• FutureWarning: In future versions `DataFrame.to_latex` is expected to utilise the base implementation of `Styler.to_latex`

  #388 opened 2 years ago by fwitte
  0