/gotestsum

'go test' runner with output optimized for humans, JUnit XML for CI integration, and a summary of the test results.

Primary LanguageGoApache License 2.0Apache-2.0

gotestsum

gotestsum runs tests using go test --json, prints friendly test output and a summary of the test run. It is designed for both local development, and running tests in a CI system.

See the complete list of features below.

Install

Download a binary from releases, or build from source with go get gotest.tools/gotestsum.

Demo

A demonstration of three --format options.

Demo
Source

Features

Integrations

Format

Set a format with the --format flag or the GOTESTSUM_FORMAT environment variable.

gotestsum --format testname

Supported formats:

  • dots - print a character for each test.
  • pkgname (default) - print a line for each package.
  • pkgname-and-test-fails - print a line for each package, and failed test output.
  • testname - print a line for each test and package.
  • standard-quiet - the standard go test format.
  • standard-verbose - the standard go test -v format.

Have a suggestion for some other format? Please open an issue!

Summary

A summary of the test run is printed after the test output.

DONE 101 tests[, 3 skipped][, 2 failures][, 1 error] in 0.103s

The summary includes:

  • A count of: tests run, tests skipped, tests failed, and package build errors.
  • Elapsed time including time to build.
  • Test output of all failed and skipped tests, and any package build errors.

To disable parts of the summary use --no-summary section.

Example: hide skipped tests in the summary

gotestsum --no-summary=skipped

Example: hide failed and skipped

gotestsum --no-summary=skipped,failed

Example: hide output in the summary, only print names of failed and skipped tests and errors

gotestsum --no-summary=output

JUnit XML output

When the --junitfile flag or GOTESTSUM_JUNITFILE environment variable are set to a file path, gotestsum will write a test report, in JUnit XML format, to the file. This file can be used to integrate with CI systems.

gotestsum --junitfile unit-tests.xml

If the package names in the testsuite.name or testcase.classname fields do not work with your CI system these values can be customized using the --junitfile-testsuite-name, or --junitfile-testcase-classname flags. These flags accept the following values:

  • short - the base name of the package (the single term specified by the package statement).
  • relative - a package path relative to the root of the repository
  • full - the full package path (default)

Note: If Go is not installed, or the go binary is not in PATH, the GOVERSION environment variable can be set to remove the "failed to lookup go version for junit xml" warning.

JSON file output

When the --jsonfile flag or GOTESTSUM_JSONFILE environment variable are set to a file path, gotestsum will write a line-delimited JSON file with all the test2json output that was written by go test --json. This file can be used to compare test runs, or find flaky tests.

gotestsum --jsonfile test-output.log

Post Run Command

The --post-run-command flag may be used to execute another command after the test run has completed. The binary will be run with the following environment variables set:

GOTESTSUM_FORMAT        # gotestsum format (ex: short)
GOTESTSUM_JSONFILE      # path to the jsonfile, empty if no file path was given
GOTESTSUM_JUNITFILE     # path to the junit.xml file, empty if no file path was given
TESTS_ERRORS            # number of errors
TESTS_FAILED            # number of failed tests
TESTS_SKIPPED           # number of skipped tests
TESTS_TOTAL             # number of tests run

To get more details about the test run, such as failure messages or the full list of failed tests, run gotestsum with either a --jsonfile or --junitfile and parse the file from the post-run-command. The gotestsum/testjson package may be used to parse the JSON file output.

Example: desktop notifications

First install the example notification command with go get gotest.tools/gotestsum/contrib/notify. The command will be downloaded to $GOPATH/bin as notify. Note that this example notify command only works on macOS with terminal-notifer installed.

gotestsum --post-run-command notify

Re-running failed tests

When the --rerun-fails flag is set, gotestsum will re-run any failed tests. The tests will be re-run until each passes once, or the number of attempts exceeds the maximum attempts. Maximum attempts defaults to 2, and can be changed with --rerun-fails=n.

To avoid re-running tests when there are real failures, the re-run will be skipped when there are too many test failures. By default this value is 10, and can be changed with --rerun-fails-max-failures=n.

Note that using --rerun-fails may require the use of other flags, depending on how you specify args to go test:

  • when used with --raw-command the re-run will pass additional arguments to the command. The first arg is the name of a go package, and the second is a -run flag with a regex that matches all the failed tests in that package. These additional args can be passed to go test, or a test binary.

  • when used with any go test args (anything after -- on the command line), the list of packages to test must be specified as a space separated list using the --packages arg.

    Example

    gotestsum --rerun-fails --packages="./..." -- -count=2
    
  • if any of the go test args should be passed to the test binary, instead of go test itself, the -args flag must be used to separate the two groups of arguments. -args is a special flag that is understood by go test to indicate that any following args should be passed directly to the test binary.

    Example

    gotestsum --rerun-fails --packages="./..." -- -count=2 -args -update-golden
    

Custom go test command

By default gotestsum runs tests using the command go test --json ./.... You can change the command with positional arguments after a --. You can change just the test directory value (which defaults to ./...) by setting the TEST_DIRECTORY environment variable.

You can use --debug to echo the command before it is run.

Example: set build tags

gotestsum -- -tags=integration ./...

Example: run tests in a single package

gotestsum -- ./io/http

Example: enable coverage

gotestsum -- -coverprofile=cover.out ./...

Example: run a script instead of go test

gotestsum --raw-command -- ./scripts/run_tests.sh

Note: when using --raw-command you must ensure that the stdout produced by the script only contains the test2json output. Any stderr produced by the script will be considered an error (this behaviour is necessary because package build errors are only reported by writting to stderr, not the test2json stdout). Any stderr produced by tests is not considered an error (it will be in the test2json stdout).

Example: using TEST_DIRECTORY

TEST_DIRECTORY=./io/http gotestsum

Executing a compiled test binary

gotestsum supports executing a compiled test binary (created with go test -c) by running it as a custom command.

The -json flag is handled by go test itself, it is not available when using a compiled test binary, so go tool test2json must be used to get the output that gotestsum expects.

Example: running ./binary.test

gotestsum --raw-command -- go tool test2json -t -p pkgname ./binary.test -test.v

pkgname is the name of the package being tested, it will show up in the test output. ./binary.test is the path to the compiled test binary. The -test.v must be included so that go tool test2json receives all the output.

To execute a test binary without installing Go, see running without go.

Finding and skipping slow tests

gotestsum tool slowest reads test2json output, from a file or stdin, and prints the names and elapsed time of slow tests. The tests are sorted from slowest to fastest.

gotestsum tool slowest can also rewrite the source of tests slower than the threshold, making it possible to optionally skip them.

The test2json output can be created with gotestsum --jsonfile or go test -json.

See gotestsum tool slowest --help.

Example: printing a list of tests slower than 500 milliseconds

$ gotestsum --format dots --jsonfile json.log
[.]····↷··↷·
$ gotestsum tool slowest --jsonfile json.log --threshold 500ms
gotest.tools/example TestSomething 1.34s
gotest.tools/example TestSomethingElse 810ms

Example: skipping slow tests with go test --short

Any test slower than 200 milliseconds will be modified to add:

if testing.Short() {
    t.Skip("too slow for testing.Short")
}
go test -json -short ./... | gotestsum tool slowest --skip-stmt "testing.Short" --threshold 200ms

Use git diff to see the file changes. The next time tests are run using --short all the slow tests will be skipped.

Run tests when a file is modified

filewatcher will automatically set the TEST_DIRECTORY environment variable which makes it easy to integrate gotestsum.

Example: run tests for a package when any file in that package is saved

filewatcher gotestsum --format testname

Development

GoDoc CircleCI Go Reportcard

Pull requests and bug reports are welcome! Please open an issue first for any big changes.

Thanks

This package is heavily influenced by the pytest test runner for python.