opulo-inc/lumenpnp

Issues

• v4.0.0 x-idler-mount print issues

  #734 opened a month ago by evandavey
  1

• v4.0.0 feeder slot 7 is narrower than other slots

  #735 opened a month ago by atanisoft
  0

• Too Many THT Components

  #696 opened 2 months ago by sphawes
  1

• Front leg idler mount - Screw does not sufficiently reach nylon section of the lock nut

  #712 opened 4 months ago by G-Pereira
  0

• Nozzle design o-ring specification

  #731 opened 4 months ago by asm308
  4

• i want to modify the head of the lumen pnp 3.1/3.2 so i can glue and some other things. now i want to modify the head but i cant draw in freecad but i can in solidworks. is there anyone who can provide me with the drawings of this machine and in particular the drawing of the head where the camera and arms etc are attached?

  #732 opened 4 months ago by panaken
  1

• kicad projects reference private libraries not in the github repository

  #733 opened 4 months ago by asm308
  2

• Update CAD to support 2.25mm thick M3-square-nut

  #729 opened 4 months ago by lucian151
  0

• Mobo Fuse Identifier

  #691 opened a year ago by AzureOz
  0

• Error with machine.xml in setup of OpenPnP

  #730 opened 5 months ago by alokthakrar
  1

• Pneumatics plumbing inconsistencies

  #727 opened 5 months ago by asm308
  8

• Please send be DIY build guide doc link if possible.

  #726 opened 6 months ago by hemangjoshi37a
  3

• Rotation Stepper Runaway Heat

  #719 opened 6 months ago by neatstranger
  7

• Protection on the sensor inputs to the micro

  #728 opened 6 months ago by reesesm2000
  0

• Drag Chain specified in 3.0.5 BOM has wrong mounting foot print

  #686 opened 7 months ago by rmhorwitz
  2

• Add PWM Capability to MOSFET outputs (Fan Outputs)

  #701 opened a year ago by warasilapm
  5

• Proper Motherboard Enclosure

  #699 opened 8 months ago by sphawes
  3

• Missing GPIO Header

  #700 opened 8 months ago by sphawes
  1

• Use USB specific ESD protection package

  #706 opened a year ago by warasilapm
  5

• Add reverse-current protection to supplies (mobo)

  #708 opened a year ago by dan-gies
  3

• Ringlight U1 (SN74AHCT1G32), wrong JLCPCB part number

  #723 opened 8 months ago by skuep
  1

• reduce noise by replacing large decoupling capacitor footprints with smaller ones

  #724 opened 8 months ago by Ruskuls
  0

• Error while reading machine.xml in new configuration v3.2-01

  #718 opened 10 months ago by kheygetyan
  8

• Check for Inductor Whine

  #720 opened 10 months ago by solarmax1
  0

• Printed Parts Revision Information

  #692 opened a year ago by AzureOz
  2

• Hello, every time you reopen Openpnp Feida's slot address: None, you need to click Find to display the slot address

  #683 opened 10 months ago by 84864797
  1

• Starting BYOP build, which release should I print?

  #717 opened 10 months ago by rxs621
  1

• Lumen V3 XGZP6857D I2C vacuum sensors delayed by one reading

  #672 opened a year ago by wolfstrassen
  3

• JST SMD Vertical connector does not fit top camera mount

  #714 opened a year ago by G-Pereira
  0

• Include board ID on rev5 mobo

  #707 opened a year ago by konkers
  6

• Is proteus vsm based pcb supported in lumenpnp?

  #710 opened a year ago by hemangjoshi37a
  2

• Where is 3d assembly design files ?

  #709 opened a year ago by hemangjoshi37a
  4

• Remove I2C MUX and use 2nd I2C Port for Vacuum Sensors

  #705 opened a year ago by KC0D
  2

• machine,xml error

  #711 opened a year ago by goodmandj
  0

• Electromagnetic Compatibility

  #698 opened a year ago by sphawes
  5

• REV05 USB Shield Termination

  #702 opened a year ago by andrewortman
  1

• Thermal pads on motor drivers have thermal reliefs

  #704 opened a year ago by dan-gies
  0

• SMT connectors are weakly mounted

  #703 opened a year ago by dan-gies
  1

• Pololu Standard Stepper Drivers are Costly and Time Consuming

  #697 opened a year ago by sphawes
  1

• Broken wires to the rotation-axis motor

  #693 opened a year ago by martin-vitek
  1

• XGZP6857D extact version on mobo Rev.04

  #695 opened a year ago by jarija
  0

• 3.1.0 Release BOM links to non-rotary pneumatic adapters which are not what is in 3.1.0 designs

  #688 opened a year ago by nathanaelhuffman
  0

• Rev 4 Mobo has a schematic labeling error for X, Y limits

  #684 opened a year ago by troth530
  1

• Strip Feeder Standardization

  #677 opened a year ago by lucian151
  0

• Unable to compile Marlin 2.1.2.1 using the configuration file (REV4)

  #681 opened a year ago by 84864797
  2

• GITHUB action dependancies need updating to node16 from node12

  #680 opened a year ago by stuartpittaway
  0

• Folder "ftp-backups" should be removed from GITHUB repo

  #679 opened a year ago by stuartpittaway
  0

• Linear Rail Bolts Marginally Interfere with X Gantry Back

  #676 opened a year ago by lucian151
  2

• Lumen Feeder: Suggestion / Enhancement: Feed while move to Pick

  #673 opened a year ago by RRudi92
  0

• Link in readme leads to 404

  #674 opened a year ago by Freddy0604n
  0