Issues
- 2
Making jigs open source
#661 opened by JudgeBeeb - 3
- 6
Marlin: Stepper motor current setting for I & J (Z rotation) axes is too high
#614 opened by solarmax1 - 3
Mobo Rev4 Decoupling Capacitor Issues
#601 opened by Magpie-81 - 1
Create a Testpoint Layer in Kicad
#602 opened by Magpie-81 - 1
- 4
FTP POS file missing
#620 opened by gabeseltzer - 3
Need strain relief on Z-gantry...
#659 opened by nweaver - 4
- 2
V3.02 Camera focus
#656 opened by ad6fp - 2
V3 Resets "Randomly"
#651 opened by cjstangman - 0
- 1
- 2
- 0
Link to OpenPnP config files needs update
#597 opened by solarmax1 - 11
- 1
FDM-0044-01 (x-gantry-roller-carriage) and x-gantry-front: Roller axle distances do not match
#586 opened by Magpie-81 - 1
- 4
MOBO schematic and PCB design suggestions
#578 opened by rfm24 - 1
Generate OpenPnP Machine config file with relaeses
#579 opened by gabeseltzer - 1
- 1
Clarify which NEMA11 is used
#622 opened by saloid - 1
Some problems and suggestions for the new version
#610 opened by liuyang0690 - 1
Chamfer m3 nut holes to fix elephant's foot
#629 opened by CurlyTaleGames - 1
Readme broken link to feeder.png
#623 opened by spuder - 2
No x y axis limit switches LumenPnP ver 3
#608 opened by hedon77 - 1
[Suggestion] 12mm Strip Feeder STL is positioned inversely should be rotated upside down.
#613 opened by kaklik - 1
Feeder Floor PCB insufficient vias on ground
#639 opened by solarmax1 - 0
- 0
MOBO Bom Questions
#646 opened by beamsjr - 1
Feeder folder should be removed from this repo
#663 opened by Jnesselr - 0
- 2
Head 1 (L) Axis driver stops when running job
#645 opened by alphaomega16 - 1
- 0
V3 documentation issues, Running Your First Job
#654 opened by dalegrover - 2
- 2
- 3
Ring Light Level Shifter Vih is Marginal
#631 opened by solarmax1 - 0
Top camera's focus screw is hard to reach
#600 opened by lucian151 - 0
for FTP instructions, shouldn't it be import board -> Named CSV? the file is ftp-top.pos.csv now?
#612 opened by bangell - 0
Some problems and suggestions for the new version
#609 opened by liuyang0690 - 4
- 0
The resistance value and lamp bead color are not provided in the BOM of FTP board
#594 opened by liuyang0690 - 1
Small swing on vacuum sensor readings
#585 opened by gabeseltzer - 1
- 0
FDM-0017 friction on screw head
#582 opened by ddoiron79 - 0
FDM-0011-02 height of the idle pulley
#583 opened by ddoiron79 - 3
No FDM-8000_corndog.stl in v2.1.4
#576 opened by Con30 - 3
Documentation for PCB Staging Plate
#580 opened by gabeseltzer - 4
Printing Parts
#577 opened by DavePaulsen