Issues
- 7
USB-C instead of micro USB
#18 opened by jmi2k - 14
DFU source code?
#45 opened by nicolasnoble - 3
Restoration of DFU bootloader
#57 opened by jrsa - 0
Can't open 0.2.1 schematics in KiCad
#58 opened by wyager - 3
- 3
Lattice Diamond Compatibility
#41 opened by dramoz - 2
UDQS/LDQS nets are switched on the SDRAM
#24 opened by benvanik - 1
FPGA disconnects after download is done
#54 opened by DanaelCarbonneau - 3
Problems with 85F
#48 opened by japm48 - 2
LiteDRAM's ECP5 IOs
#53 opened by francis2tm - 2
- 0
docs: Update windows instructions
#49 opened by gregdavill - 4
RISC-V with custom gateware
#35 opened by fdarling - 0
Add openocd configs
#47 opened by gregdavill - 5
Better Docs
#11 opened by gregdavill - 1
DDR3 Routing Issue
#46 opened by TheAnimatrix - 2
I can add your board to IceStudio IDE
#44 opened by benitoss - 0
doc: Specify battery connector voltage
#42 opened by gregdavill - 2
Documentation for r0.2.1
#39 opened by nicolasnoble - 1
Question: what version is SD interface?
#38 opened by ralphhipps - 5
Example gateware
#6 opened by gregdavill - 0
r0.2.1: R15,R35 BOM error
#40 opened by gregdavill - 2
r0.2.1 DFM changes
#25 opened by gregdavill - 0
dfu bootloader v3.1 does not exit cleanly
#37 opened by gregdavill - 4
- 0
Duplicate filled zone
#34 opened by daglem - 1
Missing pullup on PROGRAMN
#32 opened by gregdavill - 0
- 0
r0.2.1: VBATT voltage divider
#30 opened by gregdavill - 12
- 0
- 2
SPI flash bootloader protection
#27 opened by DurandA - 2
- 1
STL for case?
#21 opened by titanous - 1
- 5
PWM control of LED in Linux
#20 opened by pdp7 - 5
RISC-V and 128MB memory
#17 opened by salmansheikh - 2
Readme has space in 'Orange Crab"
#13 opened by CarlFK - 3
DDR3 Layout Changes
#3 opened by gregdavill - 1
User/Charge LED brightness
#5 opened by gregdavill - 2
- 3
ECP5 Reset tests
#4 opened by gregdavill - 1
Swap Flash footprint
#2 opened by gregdavill