osresearch/spispy

Issues

• Can't load rom into RAM

  #38 opened a year ago by doob85
  0

• quick question about hardware for this

  #37 opened a year ago by hanetzer
  0

• Walkthrough of setup and use

  #13 opened 5 years ago by osresearch
  1

• SRAM instead ?

  #36 opened 2 years ago by fenugrec
  5

• Cant build spispy because of Error in Verilog

  #35 opened 2 years ago by doob85
  0

• spispy on the Glasgow

  #34 opened 2 years ago by TheWanderer1983
  0

• Missing LICENSE

  #32 opened 4 years ago by TechnologyClassroom
  9

• Support higher SPI clock frequency

  #33 opened 4 years ago by microxblue
  0

• Understanding vulnerable BIOS landscape

  #30 opened 5 years ago by jans23
  2

• spispy CLI uses 100% CPU in monitor mode if device disconnects

  #28 opened 5 years ago by bluecmd
  0

• Cleanup verilog directory

  #27 opened 5 years ago by osresearch
  0

• Version command should report commit hash or something useful

  #26 opened 5 years ago by osresearch
  0

• yosys/prjrellis/nextpnr head bitstream doesn't work

  #25 opened 5 years ago by osresearch
  0

• Clean builds fail

  #24 opened 5 years ago by osresearch
  0

• Emulate flash devices with software-selectable HOLD#/RESET# pin

  #23 opened 5 years ago by mx-shift
  0

• Emulate HOLD# behavior

  #22 opened 5 years ago by mx-shift
  0

• reads can't span 0xFF boundaries

  #21 opened 5 years ago by osresearch
  0

• Low voltage SPI bus compatability

  #10 opened 5 years ago by osresearch
  14

• Improve command line interface

  #3 opened 5 years ago by osresearch
  1

• Reprogramming via tinyfpga bootloader

  #20 opened 5 years ago by osresearch
  1

• Default SFDP in block ram

  #18 opened 5 years ago by osresearch
  0

• SPI flash state machine is a mess

  #17 opened 5 years ago by osresearch
  1

• Flash erase support

  #12 opened 5 years ago by osresearch
  0

• write-ram can't cope with 16MB length

  #16 opened 5 years ago by osresearch
  0

• UART FIFO might not be FIFO

  #4 opened 5 years ago by osresearch
  1

• `spi_cs` pullup might not be strong enough

  #6 opened 5 years ago by osresearch
  1

• High-speed USB

  #11 opened 5 years ago by osresearch
  3

• Monitor mode

  #15 opened 5 years ago by osresearch
  3

• Support "Serial Flash Discoverable Parameter" (SFDP) registers

  #9 opened 5 years ago by osresearch
  4

• ifd flcomp editor

  #14 opened 5 years ago by osresearch
  2

• Dual- and Quad- SPI support

  #1 opened 5 years ago by osresearch
  1

• Support flash chip ID command

  #8 opened 5 years ago by osresearch
  0

• Multiple !CS pins

  #7 opened 5 years ago by osresearch
  0

• Log memory access to SDRAM for longer traces

  #5 opened 5 years ago by osresearch
  0

• SDRAM contents corrupted

  #2 opened 5 years ago by osresearch
  0