paulhayes/web-3d-model-customiser

Issues

• V2 JSCAD

  #55 opened 4 years ago by z3dev
  1

• Suggestion: move the mouse ears to the outer edge only

  #51 opened 5 years ago by DrRob
  0

• Artifact in stacked print

  #50 opened 5 years ago by grenmanuel
  0

• Adjustable thickness mouse-ears

  #49 opened 5 years ago by Mearman
  0

• Parametric support height

  #48 opened 5 years ago by Mearman
  0

• Extra ears?

  #47 opened 5 years ago by grenmanuel
  0

• No Issue - Just saying thanks for this tool and the updates.

  #21 opened 5 years ago by lpt100
  3

• pin support structure merges with side pins 0.4mm nozzle

  #46 opened 5 years ago by DuncanFrazer
  0

• Support for the pins is to close (stacks)

  #45 opened 5 years ago by 256FF
  1

• Rounding errors causing model to be not exactly 20mm

  #43 opened 5 years ago by pierreh
  3

• Make brim not any wider than then existing model

  #44 opened 5 years ago by pierreh
  0

• Adjust height of ears to match desired layer height

  #33 opened 5 years ago by lobodelmar
  7

• Extra skin being generated

  #28 opened 5 years ago by DJDC13
  4

• outside pins are stuck to support wall in mulstistack

  #34 opened 5 years ago by ales1
  11

• Option to increase spacing between bands

  #16 opened 5 years ago by billt79
  13

• Pin support structure is broken with 0.6mm line width (but good at 0.5)

  #41 opened 5 years ago by owennewo
  1

• Material choice does not update the model correctly

  #40 opened 5 years ago by dom-white
  4

• Error in Model and Problem with Embedded Writing - FlashPrint

  #39 opened 5 years ago by BlackMeister
  14

• Adjustable layer height setting

  #30 opened 5 years ago by Vegsaad
  3

• Add bottom reinforcement parts

  #38 opened 5 years ago by krisnoble
  2

• Downloaded model has errors

  #37 opened 5 years ago by sebleedelisle
  2

• Increase font size to accommodate larger nozzles

  #24 opened 5 years ago by romikk
  4

• Error in update on start

  #36 opened 5 years ago by paulhayes
  2

• Date mismatch leaving if I leave page open overnight

  #27 opened 5 years ago by RikAllen
  2

• Store settings?

  #32 opened 5 years ago by krisnoble
  2

• Option for original design

  #15 opened 5 years ago by patriot1889
  4

• Please can you remove all text except RC3

  #17 opened 5 years ago by IamGPIO
  2

• Option for US version

  #25 opened 5 years ago by wsjackson5
  0

• Variable gap for mouse ears?

  #31 opened 5 years ago by krisnoble
  0

• Flashprint Import Issues

  #35 opened 5 years ago by StuartWaudby
  1

• support base on double stack

  #20 opened 5 years ago by amancalledAlex
  1

• Problem with infill using S3D to slice

  #23 opened 5 years ago by rsmith21
  21

• Sacrificial layer for bed adhesion / sterility

  #19 opened 5 years ago by RikAllen
  5

• Prusa Slicer reporting 150 edge errors

  #18 opened 5 years ago by romikk
  1

• Brim ears on the

  #9 opened 5 years ago by james-fry
  5

• Name option not fucntioning

  #10 opened 5 years ago by IamGPIO
  3

• Add 2x Stack

  #5 opened 5 years ago by darthmorf
  1