pavelmc/Si5351mcu

Issues

• Allow for clock 1 and clock 2 to both run, but at the same frequency and different phase settings

  #11 opened 3 years ago by wa2mze
  6

• Backport to c

  #16 opened 6 months ago by koendv
  0

• Fixing compiler warnings when using library?

  #15 opened 2 years ago by nyanpasu64
  0

• Suggested Feature: Spread Spectrum Enable/Disable

  #14 opened 2 years ago by dtbradio
  0

• No provision for a I2C bad communication or the IC not present

  #6 opened 5 years ago by stdevPavelmc
  4

• Some Si5351 chip variants has rhe spread spectrum register on by default

  #12 opened 3 years ago by stdevPavelmc
  0

• Modifications to use I2C "Burst" mode, to improved frequency switching times

  #8 opened 4 years ago by birdwes
  0

• Error in Si5351mcu::setFreq() on frequency change if "omsynth[clk] == outdivider", but R changes

  #9 opened 4 years ago by birdwes
  2

• 25 Mhz Init not working

  #3 opened 5 years ago by AtariAndre
  4

• Small change enables compilation on ESP8266

  #7 opened 5 years ago by ramapcsx2
  3

• Too high outdivider limits max frequency

  #5 opened 6 years ago by erikkaashoek
  2

• Strange Level (not frequency) problem around 150.000 Mhz

  #2 opened 7 years ago by pavelmc
  1

• Need a way to control (on/off) the CLKx outputs.

  #1 opened 8 years ago by pavelmc
  1