peng-zhihui/HoloCubic

Issues

• 有大佬能教我一下这个怎么做吗

  #93 opened 7 months ago by EasonLYZ
  1

• VsCode检测出有三个警告

  #92 opened a year ago by EasonLYZ
  0

• 无法上传固件，报错：A fatal error occurred: Failed to connect to ESP32: No serial data received.

  #85 opened 2 years ago by ZFYoung
  3

• ironman钢铁先版本屏幕只有背景光

  #90 opened 2 years ago by perseconds
  1

• 请教一下，MainBoard和ExtendBoard之间的连接端子是哪一款

  #62 opened 3 years ago by Niffler25
  4

• 做好板子插在电脑上，device manager不识别，没有显示插上

  #69 opened 3 years ago by ZXZ1126
  1

• 刷入固件后串口一直输出rst:0x10 (rtcwdt_rtc_reset),boot:0x13 (spi_fast_flash_boot)

  #84 opened 2 years ago by mrhp02
  5

• 求助：vscode PlatformIO 编译失败

  #88 opened 2 years ago by 3lide
  1

• 向稚辉君安利开源项目 - LightCube

  #53 opened 3 years ago by Charmve
  6

• 为什么没有ino文件了

  #72 opened 3 years ago by haohaoandYY
  0

• Arduino 工程文件在哪儿？

  #82 opened 2 years ago by Yinke7
  1

• SD卡的卡槽要用哪一种

  #74 opened 3 years ago by A-Xiaojun
  2

• 3.Software/HoloTool/HoloTool.exe 的源码在哪里？

  #83 opened 2 years ago by icetech233
  0

• SD卡要用的結構和檔案在那兒?

  #81 opened 2 years ago by kscccc
  0

• 能否提供 Ironman 外壳的原始设计文件（Fusion360）？

  #80 opened 3 years ago by yangbo
  0

• 求教metal版外壳的螺丝型号

  #70 opened 3 years ago by XiaobaoAlex
  1

• 我想知道 屏幕显示什么样子 ？？笔记本电脑屏幕 能用吗？？

  #79 opened 3 years ago by icetech233
  0

• 图片转换格式

  #78 opened 3 years ago by apple596
  0

• A fatal error occurred: Failed to connect to ESP32: Invalid head of packet (0x00)

  #71 opened 3 years ago by Gradec
  3

• MPU6050一直连接不上

  #75 opened 3 years ago by KeZhangLong
  4

• "不存在或开发板没有连接”

  #77 opened 3 years ago by Muleizhang
  0

• BiliBili的那个文件没有底座啊

  #76 opened 3 years ago by yjc-2004
  0

• [E][esp32-hal-i2c.c:1434] i2cCheckLineState(): Bus Invalid State, TwoWire() Can't init sda=1, scl=0

  #73 opened 3 years ago by KeZhangLong
  1

• AD导出gerber文件时提示铺铜错误

  #67 opened 3 years ago by liuyi585851
  0

• 购买三棱镜贴膜问题

  #58 opened 3 years ago by franva
  11

• 为什么芯片可以省略外部时钟晶振，手册上不是说必须要的吗

  #66 opened 3 years ago by Yukii117
  1

• 屏幕需要旋转90°才能看清

  #55 opened 3 years ago by lizhuoran1019
  2

• 天线型号是不是写错了，找不到AN5120这个型号的天下AN2051倒是挺多的

  #56 opened 3 years ago by liangzhichao63
  9

• 母版和扩展板应该找哪家做？电阻电容贴片淘宝可以帮忙做吗？

  #65 opened 3 years ago by ChaogangChen
  1

• 转换软件有问题。

  #44 opened 4 years ago by zhaohaolei
  2

• ESP32-PICO芯片发热严重

  #48 opened 4 years ago by idnewfeel
  4

• MPU6050**焊盘是否应该接地？

  #52 opened 3 years ago by fan-ziqi
  5

• 电脑接板子时报错

  #61 opened 3 years ago by Donglin2008
  1

• OCA贴膜问题

  #59 opened 3 years ago by franva
  9

• 请问显示手机通知信息是什么原理呢？

  #57 opened 3 years ago by TeenLucifer
  0

• 水平状态下，mpu6050读到的数据有较大偏移

  #54 opened 3 years ago by DovierQAQ
  1

• setup_scr_screen.c中lv_ui结构体缺少变量

  #51 opened 4 years ago by ClimbSnail
  2

• 请问一下，使用滑块小组件要怎么通过MPU6050让滑块值改变并移动呀？

  #50 opened 4 years ago by a992487220
  0

• 未找到2.Firmware\HoloCubic_fw\lv_fs_fatfs.c

  #47 opened 4 years ago by shiniankanchaige
  1

• holo转换器.exe转换jpg图片问题

  #49 opened 4 years ago by syj0925
  0

• SD卡一直无法读取，对SD卡有什么特殊要求吗

  #36 opened 4 years ago by Aria-CYF
  1

• 显示屏不亮

  #37 opened 4 years ago by lmf-bit
  0

• undefined reference to lv_fs_if_init

  #46 opened 4 years ago by shiniankanchaige
  0

• 1

  #42 opened 4 years ago by Aria-CYF
  0

• Failed to connect to ESP32: Timed out waiting for packet header

  #43 opened 4 years ago by havefun-hh
  2

• 没有ino文件

  #45 opened 4 years ago by PhangHe
  0

• I2C初始化失败求助

  #41 opened 4 years ago by xusixteen
  0

• 请问如何使SD卡在电脑上显示成虚拟盘符？好像没找到这部分的代码

  #40 opened 4 years ago by BinM0
  0

• （不妥请删除）请问到底哪个是您的ytb账号，还是这两个都是李鬼在冒充

  #39 opened 4 years ago by markmingjie
  2

• lvgl显示图片时报错，NULL pointer，请大佬指点

  #38 opened 4 years ago by w-wu14
  0