periph/host

Issues

• onewire-list doesn't work as expected.

  #60 opened 3 months ago by gsexton
  3

• sysfs-gpio: use new /sys/bus/gpio/devices/gpiochipN, also listed as /dev/gpiochipN

  #39 opened a year ago by maruel
  4

• Add support for orange pi zero 3

  #57 opened 4 months ago by didiercrunch
  0

• Clarify Error Message for PWM Support

  #56 opened 5 months ago by beyazkemal
  0

• Support for CH347 based host

  #55 opened 6 months ago by draeron
  1

• SIGBUS fault panic on rpi4 using PWM

  #52 opened 6 months ago by sh4r1k7
  5

• uart: Implement for Raspberry Pis and other boards with an on-board serial port

  #53 opened 2 years ago by adev73
  3

• bcm283x: revamp DMA support

  #44 opened a year ago by maruel
  2

• host.Init forked processes persist and maintain high CPU load

  #51 opened a year ago by BrockMatthews
  4

• allwinner: move content into new packages a64, gr8, h3 and r8, sharing code with 'internal'

  #50 opened a year ago by maruel
  0

• pruicss: implement PRU-ICSS support

  #49 opened a year ago by maruel
  0

• cpu: Add Realtime() function

  #48 opened a year ago by maruel
  0

• am335x: implement memory mapped GPIO access

  #47 opened a year ago by maruel
  1

• allwinner: CPU drivers should expose pins even if can't expose due to lack of privilege

  #46 opened a year ago by maruel
  0

• iio: Support linux Industrial I/O (iio)

  #45 opened a year ago by maruel
  0

• bcm283x (or new pkg): BCM2711 clock source is off

  #34 opened a year ago by xvzf
  1

• sysfs: export function to reenumerate all devfs/sysfs interfaces

  #43 opened a year ago by maruel
  0

• sysfs-spi: graceful fallback on unidirectional I/O on buggy driver

  #42 opened a year ago by maruel
  0

• sysfs-spi: transparently support large transactions

  #41 opened a year ago by maruel
  0

• sysfs-gpio: expose pins found in /sys/class/pwm and reconcile with gpio

  #40 opened a year ago by maruel
  0

• Support R/W of OTP fuses on BCM2711 processors

  #38 opened a year ago by seth-pierson
  1

• fs: move to context.Context based ListEdges() function

  #37 opened a year ago by maruel
  0

• sysfs: Halt() does not unblock WaitForEdge()

  #36 opened a year ago by maruel
  0

• Drivers skipped

  #35 opened a year ago by ea7kir
  4

• bcm283x (or new pkg): support alternate functions of the bcm2711

  #24 opened a year ago by knieriem
  3

• Allwinner software/hardware PWM

  #31 opened 2 years ago by biotinker
  0

• sysfs: GPIO unexport at exit

  #29 opened 2 years ago by sausagenoods
  1

• Support for MCP2221/MCP2221A

  #28 opened 2 years ago by kabili207
  1

• Support GPIO pins on Jetson Orin boards

  #26 opened 2 years ago by penguinland
  9

• Serial Interface Update Question

  #18 opened 2 years ago by schmidtw
  4

• allwinner: extend supported CPUS (H2, H3)

  #1 opened 2 years ago by chenjeff622
  6

• allwinner: extend support for H5 (sun50i-h5)

  #21 opened 2 years ago by TzeWey
  0

• allwinner: pull-up registers not set correctly

  #19 opened 2 years ago by TzeWey
  1

• ftdi depends on cgo

  #17 opened 2 years ago by schmidtw
  2

• sysfs i2c: support smbus-only adapters

  #15 opened 3 years ago by vamposdecampos
  1

• pmem example code incorrect

  #2 opened 4 years ago by martin2250
  3

• persistent modify PWM, report IOCTL error, and hung

  #12 opened 3 years ago by fly-studio
  1

• MCP23xxx Direct Register Access

  #8 opened 3 years ago by gsexton
  1

• gpio Pin Read doesn't work as expected.

  #9 opened 3 years ago by gsexton
  1

• How do I Open a Serial Port?

  #7 opened 3 years ago by gsexton
  2

• ftdi: expose MPSSE support

  #6 opened 3 years ago by maruel
  0

• ftdi: support edge triggering

  #5 opened 3 years ago by maruel
  0

• ftdi: Allow re-enumeration of devices and GPIO pins

  #4 opened 3 years ago by maruel
  0

• sysfs: work around broken i2c drivers that fail on read-only ioctl

  #3 opened 4 years ago by maruel
  0