bme280

There are 537 repositories under bme280 topic.

  • quen0n/unitemp-flipperzero

    Flipper Zero application for reading temperature, humidity and pressure sensors like a DHT11/22, DS18B20, BMP280, HTU21 and more

    Language:C28982636

  • hackerspace-silesia/Smogomierz

    Smogly(formerly: Smogomierz) - simple and cheap PM 2.5 and PM10 sensor based on NodeMCU (ESP8266) or ESP32

    Language:C++1243211539
  • WT32-ETH01-LAN-8720-RJ45-

    ldijkman/WT32-ETH01-LAN-8720-RJ45-

    WT32-ETH01 LAN 8720 RJ45 wired Wireless-tag

    Language:C++1098428

  • koenvervloesem/ESPHome-Air-Quality-Monitor

    ESPHome configuration for a DIY indoor air quality monitor for CO₂ concentration, PM2.5 and PM10 concentrations, and temperature, humidity and pressure

    Language:C1016211

  • lupyuen/stm32bluepill-mynewt-sensor

    Apache Mynewt Sensor Network Application for STM32 Blue Pill and nRF52 with Visual Rust, NB-IoT, GPS, iBeacon, NimBLE, ESP8266 (WiFi Geolocation) and nRF24L01

    Language:C1016134

  • ErickSumargo/Drivety

    Drivety: Smart App Assistant to Secure Inside Car Activity. #AndroidDevChallenge

    Language:Kotlin803012

  • STEMinds/Eduponics-Mini

    MicroPython MQTT & code example for Eduponics mini ESP32 learning kit

    72929

  • kmaximv/Wi-Fi-Sensor

    Language:C++71202826

  • paulvha/sps30

    Sensirion SPS30 driver for ESP32, SODAQ, MEGA2560, UNO,UNO-R4 ESP8266, Particle-photon on UART OR I2C coummunication

    Language:C++67122927

  • VersBinarii/bme280-rs

    A platform agnostic Rust driver for the Bosch BM[PE]-280

    Language:Rust6162173

  • periph/host

    Go·Hardware·Lean - Host drivers

    Language:Go5844534

  • merlokk/SmartHome

    esp8266 IoT to mqtt bridge. Eastron SDM220, SDM230, SDM630 modbus; AZ7798; SenseAir s8; BME280; HDC1080; Plantower PMS5003, PMS7003, PMSA003

    Language:C++56143132

  • Bastelschlumpf/SnorkTracker

    GPS IoT tracker board for scanning gps and environment information and sending this to a MQTT server via GPRS.

    Language:C++5292513

  • pikot/tsh-watch

    Yet another esp32 watch

    Language:C++51303

  • hiveeyes/arduino

    Arduino-compatible MCU firmware code for sensor-, telemetry-, and gateway-appliances.

    Language:C++49231931

  • foorschtbar/LoRaProMini

    A low power LoRaWAN Node

    Language:HTML41227

  • yanbe/bme280-esp-idf-i2c

    Sample code for reading values from a BME280 temperature-humidity-pressure sensor, via ESP-IDF's I2C master driver, supports both normal mode and forced mode described in the datasheet. https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME280_DS001-11.pdf

    Language:C414517
  • arduino-bme280

    malokhvii-eduard/arduino-bme280

    💧 Arduino library for Bosch Sensortec BME280 – combined temperature, pressure, humidity sensor. The library allows using the sensor over I2C or SPI on any board that supports Arduino.

    Language:C++36131
  • CaravanPi

    spitzlbergerj/CaravanPi

    Smarthome for Caravans and Motor Homes - System for measuring and displaying various values in caravans and motor homes, including climate values, fill levels and leveling data, energy data, propane/butane sensor. incl. display, config website, test routines, etc. Own circuit board created

    Language:Python36697

  • microdimmer/homeweather_esp8266

    weather station, arduino esp8266, st7920, mh-z19, BME-280

    Language:C++347210

  • IU5HKU/MiniWXStation

    ESP8266 and BME280 sensor for a minimalist weather station to put on your terrace

    Language:C3361221

  • adlerweb/ESP8266-BME280-Multi

    ESP8266 + BME280 -> MQTT, Serial, HTTP-Server, HTTP-Client/Volkszähler

    Language:C++299415

  • utkumaden/esp-idf-bmx280

    BMP280 and BME280 I2C driver for ESP32 boards using the IDF toolchain.

    Language:C292313

  • vonneudeck/mouldy

    A simple Prometheus exporter for metrics from Bosch BME280 sensors for ESP8266 based boards with NodeMCU firmware.

    Language:C28418

  • gumslone/tehybug

    Low Power WIFI weather stations and environmental data loggers based on ESP8266/ESP8285 Module

    Language:C++27897

  • lupyuen/send_altitude_cocoos

    IoT program for Arduino Uno / STM32 Blue Pill (libopencm3) that reads BME280 temperature + humidity + altitude sensors, via I2C or SPI with DMA and multitasking. Sends sensor data to Sigfox via Wisol Sigfox module on UART. Runs on cocoOS task scheduling library http://www.cocoos.net

    Language:C++251016

  • lupyuen3/blockly-zig-nuttx

    Visual Programming for Zig with NuttX Sensors

    Language:JavaScript24101

  • Turta-io/IoTHAT

    Turta IoT HAT Source, Reference and Manual.

    Language:C#24817

  • abish7643/ESP32Cam-I2CSensors

    Use TwoWire to Create Custom I2C Bus on an AI-Thinker ESP32Cam & Interface I2C Sensors (BME280).

    Language:C++22341

  • JackGruber/esp32_ttn_environmental_sensor

    Battery/solar-powered ESP32 TTN (LoraWAN) sensor for measuring temperature, humidity, air pressure and fine dust.

    Language:C++22512

  • mhaack/mqtt-bme280-homie

    MQTT Sensor project with BME280 for smart home 🏡 automation

    Language:C++17342
  • TempRa

    siketyan/TempRa

    Monitors the temperature, the humidity and the pressure in your room on Raspberry Pi.

    Language:Java17582

  • chrisb2/air-quality

    An air quality sensor and display that uses the BME280 and CCS811 sensors to read temperature, relative humidity, equivalent CO2 (eCO2) and Total Volatile Organic Compound (TVOC) and displays the values on a 2.9in Waveshare e-Paper display.

    Language:Python16303

  • koenvervloesem/send-my-sensor

    Zephyr-based firmware to upload sensor data via Apple's Find My network

    Language:C16301

  • LukePrior/TTN-BME280-Weather-Station-Heltec-CubeCell-HTCC-AB01

    This repository contains all the code and steps required to setup a BME280 with the Heltec CubeCell HTCC-AB01 on TTN Australia.

    Language:C++16224

  • malokhvii-eduard/airly

    💨 A collection of tiny and ultra-cheap web things for monitoring air quality. The devices measure: temperature, humidity, barometric pressure, the concentration of carbon dioxide, dew point. The devices easily integrate into the Web of Things ecosystem and can be used indoor or outdoor.

    Language:C++16301