Pinned Repositories
athena-klipper-module
Custom klipper modules for the Athena Printer
candleLight_fw
gs_usb compatible firmware for candleLight, cantact and canable
klipper
Klipper is a 3d-printer firmware
Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
OctoPrint-Octoremote
A hardware remote for Octoprint controlled 3D Printers
OctoPrintStudio
sigmoid-bsp
STM32WB55_PlantSensor
Project goal (for the first stage) is to develop an IOT System based on the STM32WB SoC to monitor soil and air Moisture as well as environment temperature. Therefore several components will be developed including a battery powered sensor to stick into your flower pots and a base station to display and log the measurements from the sensors. Communication between the sensors and the base will be done via bluetooth mesh. Later more kinds of sensors may be developed as well.
Voron-KCH
Little helpers to manage printing your Voron Parts
ZeroPointModule
A Raspberry Pi Zero 2W Carrier for 3D-printing and autonomous driving
pkElectronics's Repositories
pkElectronics/OctoPrint-Octoremote
A hardware remote for Octoprint controlled 3D Printers
pkElectronics/STM32WB55_PlantSensor
Project goal (for the first stage) is to develop an IOT System based on the STM32WB SoC to monitor soil and air Moisture as well as environment temperature. Therefore several components will be developed including a battery powered sensor to stick into your flower pots and a base station to display and log the measurements from the sensors. Communication between the sensors and the base will be done via bluetooth mesh. Later more kinds of sensors may be developed as well.
pkElectronics/ZeroPointModule
A Raspberry Pi Zero 2W Carrier for 3D-printing and autonomous driving
pkElectronics/athena-klipper-module
Custom klipper modules for the Athena Printer
pkElectronics/klipper
Klipper is a 3d-printer firmware
pkElectronics/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
pkElectronics/OctoPrintStudio
pkElectronics/sigmoid-bsp
pkElectronics/Voron-KCH
Little helpers to manage printing your Voron Parts
pkElectronics/candleLight_fw
gs_usb compatible firmware for candleLight, cantact and canable
pkElectronics/e-Paper
pkElectronics/nanodlp-ui
nanoDLP user interface - ATHENA Version
pkElectronics/Open-AXII
Open AXII aims to provide convenient, ready to use board designs to interface with optical connection commonly found in power electronics
pkElectronics/plugins.octoprint.org
Sources of the OctoPrint Plugin Repository
pkElectronics/RepRapFirmware
OO C++ RepRap Firmware
pkElectronics/Force-Sensor-System
Load cell board and code for detecting forces during 3D printing
pkElectronics/rtmaps-rpi-gpio
An RTMaps Package for native support of the Raspberry Pi GPIO functions
pkElectronics/Sodaq_dataflash
An Arduino library for AT45DB dataflash chips
pkElectronics/SoftwareSerialM
software serial for M core
pkElectronics/Voron-Mods
Mods I made for my Voron printers that are worth releasing