prusa3d/Original-Prusa-MINI

Issues

• missing filament sensor ipt files

  #76 opened 7 months ago by sl1pkn07
  0

• misplaced part in printed parts

  #75 opened 7 months ago by sl1pkn07
  0

• Grafical Incorrect refreshing of the display during cool-down

  #74 opened 9 months ago by Hubseba
  0

• Disabled heating on Prusa Mini leads to nozzle blockages

  #73 opened a year ago by SeppeDR
  1

• Mini regularly goes "Malloc - out of memory " when using remote upload/delete

  #72 opened a year ago by Moyrn
  0

• Cannot Print with Mini's new Alpha Firmware

  #71 opened a year ago by HeckMee
  1

• [ENHANCEMENT] better extruder: Dual Gear extruder

  #58 opened 3 years ago by SnickCH
  3

• Press Knob before changing filament

  #70 opened a year ago by dimensionarg
  0

• Ideas for Improvements

  #69 opened a year ago by inieto
  0

• MINI+ Suggestions/Enhancements: time remaining option, menus, bed heating, purge, PrusaLink

  #67 opened 2 years ago by re490
  2

• Random Print Positioning

  #65 opened 2 years ago by KlausKraemer
  1

• why can not connect mini to pronterface

  #42 opened 4 years ago by Surealjedeye
  7

• Force reset required if USB removed on print preview

  #64 opened 2 years ago by hamdeli
  1

• Prusa Mini+ Z-top R1.1 - Extra Height

  #63 opened 2 years ago by seifer69er
  5

• [ENHANCEMENT] better heatbreak

  #57 opened 3 years ago by SnickCH
  0

• [ENHANCEMENT] Live Z option while printing at print screen

  #59 opened 3 years ago by OopAck
  3

• Documentation for LCD board missing rotary encoder.

  #62 opened 3 years ago by eivory
  0

• Lead Screw not called out on Z-Axis BOM

  #50 opened 3 years ago by pltaylor
  2

• Design improvement - power cable guide

  #52 opened 4 years ago by Fliens
  1

• putting heatbed to heat with unplugged heatbed heater won't reboot the printer

  #56 opened 3 years ago by kevinpita
  1

• Rear Fan Noise

  #61 opened 3 years ago by Punksterz
  1

• Please provide us a way to manually adjust the nozzle height

  #60 opened 3 years ago by bhs67
  1

• USB Hub not working

  #48 opened 4 years ago by passteinforth
  3

• Early Tuning Displayed but Not taken for control

  #55 opened 3 years ago by funtomaas
  1

• Uncap hot end fan PWM

  #53 opened 3 years ago by huskyte
  1

• After upgrade: PINDA gathered data not being used unless sheet is selected

  #54 opened 3 years ago by unxs0
  0

• Feature request: show number of hours spent printing

  #49 opened 4 years ago by DanidCH
  1

• Filament sensor susceptible to jamming open

  #51 opened 4 years ago by murk-sy
  1

• Prusa Mini Open Source Design

  #34 opened 4 years ago by 6ffm70
  16

• Spool holder

  #30 opened 4 years ago by okaerin
  2

• Change Filament confirmation

  #46 opened 4 years ago by Freland
  1

• Problems with Hostnames in firmware 4.3.1 (Using more than one Prusa mini)

  #47 opened 4 years ago by waltercwitt
  2

• USB stick occasionally becomes unreadable.

  #45 opened 4 years ago by damiandixon
  2

• Extruder Idler Arm Broke

  #41 opened 4 years ago by Rockohaulic
  1

• STOP button during Purge/Load/Unload

  #44 opened 4 years ago by re490
  1

• Automatic skew correction.

  #36 opened 4 years ago by riodoro1
  1

• G CODE/M CODE PRO VYNECHÁNÍ BED LEVELING

  #39 opened 4 years ago by kakafon2205
  1

• Filament run out sensor failing to pause print

  #40 opened 4 years ago by M8Harry
  1

• Request pre heating 5-10sec to prevent failsafe in cold climates

  #38 opened 4 years ago by boobslappy
  2

• Bed heating up when unloading filament

  #37 opened 4 years ago by thunderpigeon
  1

• Extruder rear piece.

  #35 opened 4 years ago by SgtKiLLx
  1

• Multicolor print - unsuccessful load filament

  #33 opened 4 years ago by Wolfram3D
  1

• Feature request: loading filament - don't heat the bed

  #24 opened 5 years ago by nigeljohnson73
  1

• Feature request: Show last M117 message

  #27 opened 5 years ago by nigeljohnson73
  1

• Feature request: loading filament - use current temps

  #26 opened 5 years ago by nigeljohnson73
  1

• Bug: Disconnecting "Remote Printer" does not return control to the Mini

  #29 opened 5 years ago by nigeljohnson73
  2

• Feature request: loading filament - cooldown after load

  #25 opened 5 years ago by nigeljohnson73
  1

• Feature request: access the menus system while "Remote Printing"

  #28 opened 5 years ago by nigeljohnson73
  1

• Magnet Improvement Suggestion

  #32 opened 5 years ago by Porch11
  1

• Extruder Gears STEP files missing.

  #31 opened 5 years ago by CacikeOtoao
  1