QCR ROS Services

The QCR ROS Services provides an easily extendable framework to allow certain elements of the ROS ecosystem to run on boot using the systemd software suite. This is useful for robots that are required to provide a fixed set of functionality at all times regardless of use-case (e.g., starting up base drivers).

QCR-Env
QCR-Services
- Service Dependency Tree
Installation
- Step 1. Adding QCR Apt Repositories
- Step 2. Installing the Packages
Usage
Usage on a Development Machine

QCR Env

The qcr-env package installs the qcr-env.bash file to /etc/qcr/. This file defines system critical information such as the location of the primary ROS workspace, and ROS master location. These variables are utilised by the various services below. For example, the roscore-daemon relies on having the ROS workspace sourced in order to start a roscore.

Note: This file can be optionally sourced within your ~/.bashrc to provide access to robot state information.

Install: sudo apt install ros-noetic-qcr-env (requires GPG Key to be set, see below)

ROS Primary & Peripheral

The QCR Environment bash script makes configuring ROS Primary (Master) / Periperhal (Slave) systems easy. First, ensure both devices are on the same network.

To configure a machine as the primary:

Open /etc/qcr/qcr-env.bash in an editor.
Ensure QCR_IS_PRIMARY is set to true (i.e., QCR_IS_PRIMARY=true).
Set QCR_ROS_IP_PRIMARY to the Primary's IP address.

To configure a peripheral machine:

Open /etc/qcr/qcr-env.bash in an editor.
Ensure QCR_IS_PRIMARY is set to false (i.e., QCR_IS_PRIMARY=false).
Set QCR_ROS_IP_PRIMARY to the Primary's IP address.
Set QCR_ROS_IP_PERIPHERAL to the Peripheral's IP address.
Restart the ROS service by running sudo systemctl restart ros.service

QCR Services

The QCR Services package installs 6 systemd services. These are the:

ROS Service: a meta-service that when started brings up the rest of the services provided by this repository, and conversely, when stopped will shutdown these same services (see the dependency tree below). It should be noted that this service does not execute any ROS software itself.
ROS-Core Service: this service creates a ROS master by executing the roscore command on startup; using the system variables defined in /etc/qcr/qcr-env.bash.
ROS-Watchdog Service: this service is responsible for ensuring that the ROS master specified in /etc/qcr/qcr-env.bash is alive and managing the life-cycle of its dependent services accordingly. In the event that it is unable to contact the ROS master it initiates a restart - causing all dependent services to stop. Until the ROS master is contactable, the ros-watchdog service will remain in an activating state, preventing its dependent services from restarting. Once the ROS master becomes contactable again however, the ros-watchdog will transition into an activated state, and its dependent services will restart. This service can be located on a different machine to the ROS master, facilitating multi-machine management of services.
ROS-Sensors Service: a meta-service that when started brings up any dependent services, and conversely, when stopped will shutdown these same services. This meta-service is meant to be used as the dependent service for all sensors that should be launched on boot.
ROS-Robot Service: a meta-service that when started brings up any dependent services, and conversely, when stopped will shutdown these same services. This meta-service is meant to be used as the dependent service for all components that should be launched on boot required by the robot (e.g., teleoperation node, hardware interface nodes, etc.).
ROS-Project Service: is a meta-service that when started brings up any dependent services, and conversely, when stopped will shutdown these same services. This meta-service is meant to be used as the dependent service for all components that should be launched on boot for your specific project (e.g., nodes containing research algorithms).

Install: sudo apt install ros-noetic-qcr-services (requires GPG Key to be set, see below). Depends on the qcr-env package and hence, the qcr-env package will be installed if it isn't already.

Service Dependency Tree

To allow for multi-machine configurations, and to provide a simplified mechanism for shutting down the complete set of services, we define a dependency tree, (seen in the image below) that facilitates the ability to manage the robot state at varying levels. For instance, by stopping the ros service on Machine 1 using the command sudo service ros stop the ros-watchdog and roscore services, which depend on the ros service will stop which will in turn cause all depedent services to stop.

Note that the ros-watchdog service has a soft dependency on the roscore service (indicated by the dashed line). When the ros-watchdog service is started, it will enter an initial starting state, which prevents any of its dependent services from starting. When it detects the ROS master has started, which it does by polling the ROS master at a frequency of 1hz, it will enter a started state, allowing its dependent services to start. In the event that the ROS master does not respond (due to being stopped), the ros-watchdog will go through a restart procedure, which will cause its dependent services to stop, before entering back into its starting state and waiting for the ROS Master to come back online.

This design allows us to create services that depend on a ROS Master that may be running on a different machine, a capability that is not provided by regular systemd dependencies.

Installation

Installation of these packages is intended to be done through the APT package manager.

Step 1. Adding QCR Apt Repositories

Import the GPG Key using the following command

sudo -E apt-key adv --keyserver hkp://keyserver.ubuntu.com --recv-key 5B76C9B0

Add the Robotic Vision repository to the apt sources list directory

sudo sh -c 'echo "deb [arch=$(dpkg --print-architecture)] https://packages.qcr.ai $(lsb_release -sc) main" > /etc/apt/sources.list.d/qcr-latest.list'

Update your packages list

sudo apt update

Step 2. Installing the Packages

Install the qcr-env package via:

sudo apt install ros-noetic-qcr-env

Install the qcr-services package via:

sudo apt install ros-noetic-qcr-services

Note: As part of the installation process, the services will automatically startup and register themselves to start on boot.

Usage

Creating and Configuring Services

To create and configure services we recommend you utilise the QCR Services Configuration Tool.

Starting/Stopping the Services

Managing the state of the services in this package can be accomplished through the use of either the service or systemctl commands:

sudo service {{service name}} [start|stop|restart|status]
#OR
sudo systemctl [start|stop|restart|status] {{service name}}

Where {{service name}} is the name of the service you wish to manage (i.e., ros, roscore, ros-watchdog, robot-bringup).

Accessing Logs

Accessing stdout logs from each of the services can be accomplished using the journalctl command:

journalctl -u {{service name}} --follow --lines 500