Pinned Repositories
BambuStudio
PC Software for BambuLab and other 3D printers
BIGTREETECH-GTR-V1.0
BIGTREETECH GTR V1.0 motherboard is a high-performance 3D printer main control board with the core controller STM32F407IGT6, which was launched by the 3D printing team of ShenZhen BigTree Technology CO.,LTD ., aiming at solving some problems existing in the motherboard market. The BIGTREETECH GTR V1.0 is the motherboard, and the BIGTREETECH M5 V1.0 is the expansion board.
BIGTREETECH-MINI-UPS-V2.0
BigTree Technology Co., Ltd. developed this power failure module to detect a power failure during printing and ensuring the print can be resumed after power is returns.
BIGTREETECH-Relay-V1.2
BIGTREETECH Relay V1.2 is an upgrade of the original (BIGTREETECH V1.0). After upgrading, a small MCU was added on the module to make the module more controllable and stable. Besides, we have also increased short circuit detection circuit. After connecting the 5V and GND on the motherboard to the module, if there is a 5V short circuit, the module will immediately power off to prevent damage on the motherboard and the risk of fire caused by short circuit.
BIGTREETECH-TMC2209-V1.2
TMC2209 is an ultra-silent motor driver IC for two-phase stepper motors. Its continuous drive current is 2A and peak current is 2.8A. Compared with TMC2208, the driving current of this IC is not only improved by 0.6a-0.8a, but also this IC increases the function of locked-motor test.
BIGTREETECH-TouchScreenFirmware
support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70
BIGTREETECH-TouchScreenHardware
This library contains all the open source materials of BIGTREETECH touch screen hardware.
Ultimaker2Marlin
Nextion4Marlin
Firmware for Nextion display that works with Marlin 2.0.X
Cura
3D printer / slicing GUI built on top of the Uranium framework
rachael7's Repositories
rachael7/BIGTREETECH-GTR-V1.0
BIGTREETECH GTR V1.0 motherboard is a high-performance 3D printer main control board with the core controller STM32F407IGT6, which was launched by the 3D printing team of ShenZhen BigTree Technology CO.,LTD ., aiming at solving some problems existing in the motherboard market. The BIGTREETECH GTR V1.0 is the motherboard, and the BIGTREETECH M5 V1.0 is the expansion board.
rachael7/BIGTREETECH-MINI-UPS-V2.0
BigTree Technology Co., Ltd. developed this power failure module to detect a power failure during printing and ensuring the print can be resumed after power is returns.
rachael7/BIGTREETECH-Relay-V1.2
BIGTREETECH Relay V1.2 is an upgrade of the original (BIGTREETECH V1.0). After upgrading, a small MCU was added on the module to make the module more controllable and stable. Besides, we have also increased short circuit detection circuit. After connecting the 5V and GND on the motherboard to the module, if there is a 5V short circuit, the module will immediately power off to prevent damage on the motherboard and the risk of fire caused by short circuit.
rachael7/BIGTREETECH-TMC2209-V1.2
TMC2209 is an ultra-silent motor driver IC for two-phase stepper motors. Its continuous drive current is 2A and peak current is 2.8A. Compared with TMC2208, the driving current of this IC is not only improved by 0.6a-0.8a, but also this IC increases the function of locked-motor test.
rachael7/BIGTREETECH-TouchScreenFirmware
support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70
rachael7/BIGTREETECH-TouchScreenHardware
This library contains all the open source materials of BIGTREETECH touch screen hardware.
rachael7/Ultimaker2Marlin