rstrouse/ESPSomfy-RTS

Issues

• Are you alright?

  #576 opened 5 months ago by Nickduino
  3

• ESP32-C3 Compatibility Issue? - Unreliable RTS Command Transmission

  #605 opened 2 months ago by Marc-Berg
  2

• LILYGO T-Embed ESP32-S3 CC1101 not detecting signal

  #598 opened 2 months ago by brycetg
  5

• Pairing a Shade/Motor not working when I click on Prog button (UI Interface)

  #592 opened 3 months ago by AntMarq
  7

• ESP and wireless board known to work? (amazon links please)

  #604 opened 2 months ago by sco0ts
  0

• Slow webpage load and Home Assistant

  #603 opened 2 months ago by sco0ts
  0

• Rebooting after send command

  #602 opened 2 months ago by jackshaw20
  1

• "Press and hold" to pair does not work for some shades that need it

  #578 opened 4 months ago by syko
  4

• Web page not accessible "Error opening file"

  #579 opened 4 months ago by synop6
  3

• Motors Non-Responsive After ESP32 Migration + 3D Case Contribution

  #601 opened 2 months ago by brammmieee
  0

• All but one remote is being detected

  #600 opened 2 months ago by elnacho-grande
  0

• Pergola with integrated lights

  #599 opened 2 months ago by andvarga79
  0

• WLAN fluctuations

  #577 opened 4 months ago by christianhcm
  5

• Should Somfy GX046 (RS-F1-A-433 RTS) from Markilux work?

  #597 opened 2 months ago by stalakerob
  2

• 868mhz operation

  #596 opened 2 months ago by Montilien
  1

• Situo 1 RTS Pure II remote, unable to link

  #556 opened 2 months ago by spydoor17
  2

• Unable to have esp32-c6 or s3 to boot.

  #587 opened 3 months ago by dbn-b4e
  9

• Request to analize the Somfy Eolis 3D RTS Wind Sensor output

  #594 opened 2 months ago by geokscott
  0

• 1 out of 2 Awnings work perfect

  #595 opened 2 months ago by SailingSagitta
  1

• ESP32-C6 Zero Mini

  #573 opened 5 months ago by matthieuneier
  3

• Add physical switches

  #593 opened 3 months ago by fredcazaux
  0

• Web page hangs after install

  #591 opened 3 months ago by MainWire
  1

• Paired system (awning) works but shows as unpaired

  #580 opened 3 months ago by Planchee
  1

• Problem when pairing

  #588 opened 3 months ago by sasikoa
  1

• Brel Motor

  #586 opened 3 months ago by noppie
  2

• Is the Somfy Rollixo RTS control system for roller garage doors supported?

  #590 opened 3 months ago by hbalzerbss
  0

• Wind sensor low battery not communicated to HA, but radio logs show event is received and seen by espsomfy.

  #589 opened 3 months ago by neilbrookins
  1

• assembled kit

  #581 opened 3 months ago by marsonpl
  4

• Transceiver no hits when scanning

  #567 opened 6 months ago by eivihol
  6

• No graphical interface, but connected

  #562 opened 6 months ago by LaurentN1305
  1

• Add Show as Light in Home Assistant

  #564 opened 6 months ago by DirectCurrent13
  1

• grouping covers not working

  #585 opened 4 months ago by gralfj
  0

• Pairing not possible with Benthin motor

  #583 opened 4 months ago by Peethiplatsch
  1

• Remote multiple blinds not working

  #582 opened 4 months ago by dadodasyra
  1

• ESP Somfy RTS unresponsive to commands (UI/HomeAssistant)

  #571 opened 5 months ago by chenganir
  6

• MQTT not connecting

  #575 opened 5 months ago by davidmei91
  0

• Set up frequenze more precisely

  #574 opened 5 months ago by davidmei91
  0

• HACS Installations Problem

  #572 opened 5 months ago by HaD-MFN
  0

• Use external sensors connected to HA

  #560 opened 6 months ago by kubrick89
  0

• HA Automation and 2 blinds

  #570 opened 6 months ago by poudenes
  1

• Calibrate uo and max down

  #569 opened 6 months ago by poudenes
  2

• Problem controlling LED lighting using the Dimmer Somfy module

  #566 opened 6 months ago by Samquad
  1

• Group seems to be limit to 6 shades

  #568 opened 6 months ago by pleneve
  0

• I can get signals from control but can’t send to motors

  #563 opened 6 months ago by GabrielSimoes1983
  4

• Auto update causes crash & reboot

  #565 opened 6 months ago by RowanTaubitz
  0

• Somehow I bricked my shade

  #561 opened 6 months ago by kenarsuleyman
  2

• Max number of repeat commands for groups is 7

  #559 opened 6 months ago by erwinkos
  0

• Two remotes but only one rolling code?

  #558 opened 7 months ago by playtopro
  1

• No connection to access point address 192.168.4.1

  #555 opened 7 months ago by Albert-64
  1

• Require esp32 pin high when RX is enabled/TX is enabled and low when disabled

  #557 opened 7 months ago by shikon
  0