sandeepmistry/arduino-CAN

Issues

• ESP32 actual baud rate is half of the configured

  #149 opened 2 months ago by thefatmoop
  1

• Solved: Fatal Error: esp_intr.h: No such file or directory

  #146 opened 3 months ago by onlyvinod56
  5

• setPins() for rx/tx and cs/irq?

  #139 opened 5 months ago by atestani
  3

• How can i use this library with a raspberry pi pico?

  #119 opened 2 years ago by GiuanniSomething
  1

• Learning how to work with the CAN bus.

  #152 opened a month ago by brightproject
  0

• Listen Only Mode

  #151 opened a month ago by VitorCMatias
  0

• soc/dport_reg.h

  #148 opened 3 months ago by tomvanderborgh
  2

• Fatal Error: esp_intr.h: No such file or directory

  #145 opened 4 months ago by pas-enzo
  3

• Error compiling with Adafruit Feather v2: `esp_intr.h: No such file or directory`

  #143 opened 4 months ago by midgarth
  1

• When compiling a file for esp32 s3 dev board, i get the following errors. Is there a new CAN.c file to help?

  #115 opened 2 years ago by Phil-Mitton
  7

• Custom MCP2515+TJA1042T board stuck on sending

  #142 opened 5 months ago by digitalEnthusiast
  0

• ARDUINO_ARCH_ESP32 forcing ESP32 internal CAN controller - Need MC2515

  #140 opened 5 months ago by atestani
  0

• #warning esp_intr.h is deprecated

  #138 opened 5 months ago by atestani
  1

• Not working with Espressif 3.0

  #125 opened a year ago by fixajteknik
  1

• Esp32 s3 support

  #124 opened a year ago by fixajteknik
  2

• can i work with the MCP2515 SPI MODULE instead of the MKR can shield

  #135 opened 7 months ago by mohamedsadok7
  0

• setup() and loop() functions are missing

  #134 opened 7 months ago by mohamedsadok7
  0

• ESP32SJA1000Class::filterExtended mask calculation incorrect

  #130 opened 9 months ago by DaneDuPlooy
  0

• ESP32 - only 1 extended filter working, is it possible to specify multiple filters?

  #123 opened a year ago by rosak
  13

• CPU restart in callback

  #128 opened 10 months ago by Davi512
  1

• Working with MCP2515 on Arduino Nano, but fails on ESP32

  #129 opened 10 months ago by cgavaller2
  2

• Esp32 multiple ID filter

  #127 opened 10 months ago by Davi512
  1

• ESP32 esp_intr.h header file deprecation warning

  #113 opened 2 years ago by pharapeti
  1

• 怎么知道数据有没有发送成功

  #126 opened a year ago by qq547176052
  0

• Parsing multiple packages at the same time ESP32

  #99 opened 2 years ago by g-philipp
  3

• Logic analyser

  #110 opened 2 years ago by Juliandebruin
  2

• Communication issues with SocketCAN

  #96 opened 2 years ago by paolotherocker
  4

• Filter multiple id with esp32

  #100 opened 2 years ago by Davi512
  3

• SN65HVD230DR ESP32 not communicating

  #114 opened 2 years ago by lolimpol
  1

• Is this lib dead?

  #116 opened 2 years ago by Jojo-A
  6

• Not getting messages

  #122 opened a year ago by notsolowki
  0

• Support for MCP2515 with 12MHz oscillator

  #91 opened 3 years ago by carsondarling
  6

• Feature Request: ESP32 calls the ESP-IDF TWAI driver implementation

  #86 opened 3 years ago by Dazza0
  4

• Guru Meditation Error: using SN65HVD230 on ESP32 with callback

  #98 opened 2 years ago by MirkoUgoliniDev
  2

• ESP8266 support

  #112 opened 2 years ago by Jojo-A
  3

• ESP32 CAN bus errors at 95 kbps

  #111 opened 2 years ago by Shavo650
  1

• ESP to Pi not working

  #109 opened 2 years ago by Juliandebruin
  0

• MCP2515 observe() implementation seems incorrect.

  #106 opened 2 years ago by ddejean
  3

• will not compile for Raspberry PICO RP2040

  #89 opened 3 years ago by dkiiv
  1

• Feature request: CAN/TWAI Support for ESP32-C3?

  #92 opened 3 years ago by heliophagus
  2

• CANreciever.ino example build issue

  #102 opened 2 years ago by electricsix
  0

• Wrong called interrupt for two module connected

  #88 opened 3 years ago by xooooxdeveloper76
  0

• wrong

  #87 opened 3 years ago by xooooxdeveloper76
  0

• Starting CAN failed!

  #84 opened 3 years ago by mianqi2016
  4

• CanSender hanging at endPacket

  #85 opened 3 years ago by qubolino
  1

• MKR ZERO and MKR CAN SPI BUS SPEED

  #83 opened 3 years ago by davidastagg
  0

• esp_initr.h is deprecated in Espressif SKD >=2.x

  #81 opened 3 years ago by simkard69
  1

• xx

  #82 opened 3 years ago by DomenicoDiSalvo
  0

• OBD RMP example works but CANReceiver is not working

  #80 opened 3 years ago by Som4567
  0

• [FR] Example file for filter

  #77 opened 3 years ago by italocjs
  3