sca075/mqtt_vacuum_camera

Issues

• Tracking: Images redraw when no trims are set.

  #242 opened 3 months ago by sca075
  2

• Rand256 Initial Map without segment Camera Fails to Starup.

  #230 opened 4 months ago by sca075
  4

• Fails to start with HA 2024.8

  #235 opened 5 months ago by Sn00kiT
  4

• Error after Update to HA Core Update 2024.8.0

  #233 opened 5 months ago by duffmiester
  3

• Restore Pillow decency before Home Assistant 2024.8.0

  #231 opened 5 months ago by watermarkhu
  2

• Camera does not Work with Rand256 : ValueError: not enough values to unpack (expected 2, got 0)

  #227 opened 5 months ago by Minims
  21

• Map trims reset required using one vacuum on two floors.

  #220 opened 5 months ago by carefulcomputer
  12

• Requirements for mqtt_vacuum_camera not found: ['pillow==10.3.0']

  #224 opened 5 months ago by TheZoker
  4

• MQTT battery level as binary data.

  #216 opened 5 months ago by sca075
  4

• Detect blocking point while coping the logs.

  #218 opened 5 months ago by sca075
  1

• The `schema` option is deprecated for MQTT vacuum

  #214 opened 5 months ago by tomlut
  4

• Detected blocking call to open inside the event loop

  #176 opened 5 months ago by tomlut
  32

• Vacuums entity id with "_" such as "myvacuum_floor" Colours Config Not Possible.

  #209 opened 5 months ago by sca075
  9

• Can not add camera via UI

  #210 opened 5 months ago by derekkddj
  7

• Issue while re-drawing the map.

  #205 opened 5 months ago by sca075
  2

• At HA Startup / Warning camera took longer than the scheduled update interval 0:00:03

  #200 opened 5 months ago by sca075
  1

• Another async issue just popped up in 2024.7.1:

  #201 opened 6 months ago by sca075
  0

• Only one room available when configuring room colors (reopened)

  #180 opened 6 months ago by sca075
  4

• 🚨⚠️ Attention: Migrating from Valetudo to MQTT Vacuum Camera ⚠️🚨

  #190 opened 6 months ago by sca075
  7

• Forks Immediate Mandatory Update to be done!

  #181 opened 7 months ago by sca075
  6

• Only one room available when configuring room colors

  #160 opened 7 months ago by kevinduong
  13

• Invalid Calibration, please check your config

  #175 opened 7 months ago by Sn00kiT
  9

• The camera crash from Home Assistant 2024.06.0

  #161 opened 7 months ago by sca075
  7

• Auto Zoom Fails for the last room

  #167 opened 7 months ago by sca075
  0

• IndexError: list index out of range

  #100 opened 9 months ago by anarion80
  13

• Vacuum Status Text Disconnected cause Translations Error.

  #152 opened 7 months ago by sca075
  0

• The Active User in the HA instance is incorrect.

  #146 opened 7 months ago by sca075
  1

• Index Error on Image_Draw.py

  #142 opened 8 months ago by sca075
  4

• 2024.05.2 breaks my camera

  #140 opened 8 months ago by nomonkeynodeal
  13

• Index Out of range error on the image_draw.py

  #141 opened 8 months ago by sca075
  1

• RuntimeWarning: coroutine was never awaited

  #135 opened 8 months ago by tjorim
  5

• Calibration Offsets Images Aspect Ratios change.

  #136 opened 8 months ago by sca075
  0

• Repeated Disconnected Entries in the Logs.

  #133 opened 8 months ago by sca075
  0

• Not precise coordinates for rooms while setting up xiaomi card.

  #129 opened 8 months ago by HGRT846
  6

• Exception in async_message_received

  #130 opened 8 months ago by tomlut
  5

• ModuleNotFoundError: No module named 'zlib_ng'

  #126 opened 8 months ago by tjorim
  5

• Deprecated alias Home Assistant 2024.5

  #124 opened 8 months ago by tjorim
  8

• Incompatible with HA 2024.4.4

  #121 opened 8 months ago by tjorim
  0

• Translate the vacuum text to the current UI language setting.

  #107 opened 9 months ago by sca075
  1

• migration broken since last release

  #114 opened 9 months ago by ChrisOboe
  20

• Rand256: Auto Zoom and Active Zones

  #104 opened 9 months ago by sca075
  5

• Rand256 - Problems with Zone and Spot empty coordinates.

  #109 opened 9 months ago by bkueppers
  19

• rand256 Vacuums Status Text.

  #106 opened 9 months ago by sca075
  2

• .storage folder valetudo_camera to store the data.

  #105 opened 9 months ago by sca075
  2

• Rand256 Vacuums not rendered.

  #99 opened 9 months ago by sca075
  1

• Can't change Room color

  #84 opened 10 months ago by N1c093
  6

• Support multiple floors

  #89 opened 10 months ago by carefulcomputer
  1

• Problem rendering Japanese/Chinese characters in status text.

  #86 opened 10 months ago by kodbuzz
  8

• Battery level in the "Vacuum Status" text

  #80 opened 10 months ago by zecoj
  10

• Invalid Calibration Error with any version above 1.5.7.1

  #79 opened 10 months ago by duffmiester
  7