sfeakes/AqualinkD

Issues

• Pool temp reads as extremely low even though panel shows correct temp

  #234 opened 5 months ago by jeffreymonroe
  18

• Hayward AquaRite utterly confused by AqualinkD

  #241 opened a year ago by christiaanbrand
  30

• Got working with EW-11 wireless device!

  #300 opened 3 months ago by jjarboe01
  2

• Aqualink daemon can't use extended_device_id in PDA mode

  #295 opened 3 months ago by ballle98
  1

• V2.3.4 make fails on bullseye - multiple definition of `_commands'

  #285 opened 3 months ago by ballle98
  6

• Saltwater cell - 0%-> programmed % -> 0% (bouncing) when AqualinkD service is started

  #172 opened 2 years ago by igorek24
  10

• "Notes on Aqualink PDA only (non RS panels)" link goes nowhere

  #290 opened 4 months ago by ixobelle
  3

• Support sharing same PDA ID between control panel and physical PDA

  #287 opened 4 months ago by ballle98
  1

• SWG percentage setting not working for PDA

  #251 opened 4 months ago by ballle98
  0

• AqualinkD Devices in MQTT for HASS?

  #281 opened 4 months ago by parchmaf
  0

• Serial Packet Too Large - Read Bad Packet to 0x33

  #274 opened 4 months ago by parchmaf
  4

• AqualinkD Preventing Aqualink from Setting Correct Light Color

  #236 opened a year ago by maniscalcojohn
  16

• With raspberry pi 4 aqualinkd is responding too fast and panel may reset

  #259 opened 5 months ago by ballle98
  0

• Getting wrong Temperature via MQTT but ok in web interface

  #269 opened 6 months ago by Bigfellas
  2

• Misconfigured Buttons. RS-8 Combo Panel

  #264 opened 6 months ago by EliotKhachi
  4

• VSP control for Aqualinkd

  #262 opened 8 months ago by parchmaf
  3

• Pool Light Dimmer Web UI Confusing

  #247 opened a year ago by brownjd
  3

• Support Light Dimmer in Homebridge Plugin

  #248 opened a year ago by brownjd
  0

• systemctl start fails. Command line works.

  #246 opened a year ago by brownjd
  7

• Service failed "no such file or directory

  #239 opened a year ago by originalprime
  10

• AqualinkD Installation Risks to Current Home Setup

  #240 opened a year ago by EliotKhachi
  4

• WebUI not rendering Watts

  #243 opened a year ago by jbronikowski
  6

• MQTT setup for aqualinkd

  #242 opened a year ago by Grand-Tee
  4

• Max spa temp is currently 96

  #231 opened a year ago by 42Cyborg
  5

• Pentair VS pump speed Error: One Touch: Can't set Pump RPM/GPM until type is known

  #225 opened a year ago by mcoutsoft
  17

• Can't change name of Aux 1 on web UI

  #230 opened a year ago by 42Cyborg
  2

• High salt warning error

  #224 opened a year ago by mcoutsoft
  15

• Jandy ePump on PDA not collecting correct RPMs

  #227 opened a year ago by BobClav
  8

• make clean broken on windows

  #221 opened a year ago by ballle98
  6

• make clean make fails on Pi

  #222 opened a year ago by ballle98
  2

• 2.3.1 Segmentation Fault Error on startup

  #226 opened a year ago by mcoutsoft
  1

• aqualinkd.c:1772:8: error: too few arguments to function ‘serial_logger’

  #223 opened a year ago by ballle98
  5

• Not seeing Pentair VS Pump speed

  #220 opened a year ago by mcoutsoft
  15

• Can not set SPA heater to 104

  #149 opened a year ago by ballle98
  0

• Build broken by commit 77c8e29

  #217 opened a year ago by ballle98
  4

• compiler warnings seen after bullseye update (other than mongoose)

  #173 opened a year ago by ballle98
  0

• Increase syslog level limit

  #194 opened a year ago by niharmehta
  3

• Can't run on raspberry pi 4 model B with os 64bit

  #185 opened a year ago by mdetweiler
  6

• Read RS485 bus from ESP32

  #210 opened a year ago by maniscalcojohn
  6

• AqualinkD Controlled Color Lights Not Working

  #197 opened a year ago by superdupe
  0

• Would a TTL to RS485 adapter work instead of a USB one?

  #146 opened a year ago by motolav
  0

• Pentair / J&J Lights Not Working

  #196 opened 2 years ago by superdupe
  0

• Unable to make on new Pi Zero

  #155 opened 2 years ago by ballle98
  0

• Jandy TCX Support

  #181 opened 2 years ago by liptonj
  0

• Can't turn buttons off in config.js

  #163 opened 2 years ago by SethL
  6

• SWG percentage

  #164 opened 2 years ago by SethL
  1

• Clarity re Aqualink M8 and PDA+RS

  #153 opened 3 years ago by woodgieboodgie
  3

• Running AqualinkD on PC wanting to control other equipment

  #152 opened 3 years ago by john1158way
  22

• Newbie alert: How do I "add the AqualinkD bridge" in IOS?

  #151 opened 3 years ago by jim-at-miramontes
  2

• System datetime is ignored and set to UTC

  #147 opened 3 years ago by igorek24
  5