sparkfun/Arduino_Boards

Issues

• The package_sparkfun_index.json on the main branch is not compliant with the arduino framework documentation

  #117 opened a year ago by jantje
  0

• The unofficcial list of 3th party boards points to the master branch instead of the main branch

  #116 opened a year ago by jantje
  0

• Update arm-none-eabi-gcc for SAMD boards

  #115 opened 2 years ago by stonehippo
  3

• RX_LED Doesn't Work

  #113 opened 2 years ago by EEScott
  0

• STM32 Cube Programmer (not found)

  #112 opened 2 years ago by santaimpersonator
  0

• Missing bootloader make configuration for Qwiic micro

  #111 opened 2 years ago by elsp1991
  0

• Incomplete pin definitions for Sparkfun SAMD51 Thing PLus

  #79 opened 2 years ago by ajahern95
  4

• LilyPad USB Plus - incorrect PWM definition

  #109 opened 2 years ago by oqibidipo
  0

• Product Documentation

  #100 opened 2 years ago by LeeLeahy2
  2

• Sparkfun nrf52 library missing

  #103 opened 3 years ago by Rubines
  2

• Breaks Atmel Studio

  #63 opened 6 years ago by nikita240
  1

• Outdated Arduino cores

  #108 opened 2 years ago by santaimpersonator
  0

• ESP32 - wish you would sync up to current Espressif ESP32 release

  #97 opened 2 years ago by KurtE
  1

• ESP-IDF Compatibility

  #107 opened 3 years ago by jojo2357
  1

• SAMD_21_Dev Variant.cpp RX led pin definition mistake

  #102 opened 3 years ago by aaitken203
  0

• SparkFun Qwiic Micro: Incorrect pin assignments

  #75 opened 4 years ago by adamgarbo
  1

• SparkFun_SAMD51_MicroMod not included in SDU library

  #98 opened 4 years ago by lucameier
  0

• Remove Artemis-based boards from definition file

  #95 opened 4 years ago by adamgarbo
  1

• SparkFun RedBoard Turbo: linker errors when using Serial

  #93 opened 4 years ago by sandeepmistry
  6

• MicroMod SAMD51: A1 defined as A0

  #74 opened 4 years ago by adamgarbo
  1

• SAMD21: Increase UART buffer size to 256 bytes (from 64 bytes)

  #94 opened 4 years ago by sandeepmistry
  1

• Duplicate flag in expression

  #89 opened 4 years ago by dboddie
  1

• 1.8.3 malformed SAMD custom board config breaks arduino-cli

  #90 opened 4 years ago by stonehippo
  3

• SoftwareSerial cause freezing on Pro Micro 3.3V 8MHz

  #87 opened 4 years ago by electrogian
  0

• SparkFun STM32 Boards Not Found

  #86 opened 4 years ago by ilush-a
  7

• Error downloading boards

  #85 opened 4 years ago by kritch83
  1

• ESP32 Micromod cannot connect to SSL

  #83 opened 4 years ago by davidgs
  3

• SPI1 is not able to get a response from the Adesto AT25SF041 flash chip on the SAMD51 Thing Plus

  #82 opened 4 years ago by interfect
  1

• SPI SS (PB0) pin is inaccessible on Pro Micro

  #76 opened 5 years ago by frost13it
  0

• bossac fails on Windows 10

  #51 opened 6 years ago by CevG33ko
  2

• Issue #69 fix breaks samd/variants/SparkFun_RedBoard_Turbo/variant.cpp

  #72 opened 5 years ago by DavidArmstrong
  1

• Micromod SAMD51

  #71 opened 5 years ago by benevpi
  2

• Variant.cpp file for RedBoard Turbo needs additional PinDescription entries in g_APinDescription array

  #69 opened 5 years ago by sdward-github
  1

• Usage of Wire library in master_reader.ino

  #49 opened 5 years ago by Koepel
  1

• USB Pin?

  #66 opened 5 years ago by AtomSoftTech-LT
  1

• SAMD51 MicroMod variant name doesn't match directory name

  #67 opened 5 years ago by evenfowler
  1

• SparkFun Thing Plus not showing up in platformio

  #64 opened 5 years ago by drewfish
  3

• Arduino 1.8.9/1.8.10, Openocd path needs update again

  #57 opened 5 years ago by chipperdoodles
  2

• Separate Branches Need Different Package Filenames

  #61 opened 6 years ago by oclyke
  0

• Error Installing Apollo_3 boards in Arduino IDE

  #52 opened 6 years ago by reachkvenkat94
  1

• Apollo_3 boards packaged incorrectly

  #53 opened 6 years ago by konkers
  1

• JSON Board file conflict causes one to disappear.

  #55 opened 6 years ago by edspark
  1

• bossac fails on Windows 10 Arduino 1.8.10 and Sparkfun samd 1.7.2 boards

  #60 opened 6 years ago by LuisCRSousa
  3

• SparkFun Qwiic Micro SAMD21 - High Sleep Current

  #59 opened 6 years ago by adamgarbo
  4

• Unable to install the Blynk board

  #48 opened 6 years ago by cmfrancis
  8

• Wire.requestFrom() should not be followed by Wire.endTransmission() in Qduino.cpp

  #50 opened 6 years ago by Koepel
  2

• Issue in wire library for I2C Slave on SAMD51 Thing Plus

  #56 opened 6 years ago by JordanMajd
  1

• bossac fails on Windows 10

  #47 opened 7 years ago by ShawnHymel
  3

• SparkFun SAMD21 Pro RF fails to compile with variant.h missing

  #45 opened 7 years ago by alohawild
  2

• [Question] Possible duplicate Qduino folders ?

  #43 opened 7 years ago by jpliew
  0