sparkfun/OpenLCD

Issues

• Please add a command to disable serial input

  #27 opened 4 years ago by ArizonaClark
  1

• Ability to set 'ignore RX', set contrast, set RGB without writing EEPROM

  #35 opened 4 years ago by JamesB7
  2

• Please reset mode between I2C transactions

  #34 opened 4 years ago by JamesB7
  1

• 'Ignore RX' needs to set true or false...

  #33 opened 4 years ago by JamesB7
  0

• Checksums or similar for critical commands

  #32 opened 4 years ago by JamesB7
  0

• Use a separate command for writing flash

  #31 opened 4 years ago by andrewcharnley
  5

• Display stops responding above 32 byte writes

  #29 opened 4 years ago by andrewcharnley
  5

• Map special characters to unused ascii characters

  #30 opened 4 years ago by andrewcharnley
  4

• Characters being deleted when changing backlight?

  #28 opened 4 years ago by Faeranne
  5

• Erroneous messages on display when adjusting back light

  #26 opened 4 years ago by Just-another-pleb
  9

• (More a question than bug report)

  #25 opened 4 years ago by Just-another-pleb
  5

• Persistent faint blue backlight when backlight is set to off (0,0,0) and on initial power on.

  #23 opened 5 years ago by rustycoat
  5

• Internal i2c pull up on LCD-14074

  #24 opened 5 years ago by rustycoat
  1

• Turning off system messages

  #19 opened 6 years ago by jamesraylittle
  7

• Better code for Basic Hello

  #17 opened 6 years ago by alohawild
  6

• Reduce the number of EEPROM writes with a 'Save Settings' command or EEPROM.update

  #16 opened 6 years ago by makinako
  4

• Three Files with the Extension .ino prevent compile in Windows.

  #15 opened 6 years ago by mitag
  3

• No Complete command list

  #14 opened 6 years ago by justarandomgeek
  5

• Libraries for Reuploading the Default Firmware

  #3 opened 6 years ago by bboyho
  4

• Implement version number

  #11 opened 6 years ago by nseidle
  1

• Create library

  #12 opened 6 years ago by nseidle
  24

• Set RGB Backlight in one command without flicker

  #9 opened 6 years ago by fourstix
  1

• Add function for printing the pipe character to the serLCD display

  #8 opened 6 years ago by fourstix
  1

• Display Customer Character function accepts 9 when only 8 custom characters are allowed.

  #5 opened 6 years ago by fourstix
  2

• design review for proto v02

  #4 opened 9 years ago by lewispg228
  4

• Pinout different than previous backpacks?

  #2 opened 10 years ago by lewispg228
  2

• Design Review v01

  #1 opened 10 years ago by lewispg228
  6