sparkfun/SparkFun_CAN-Bus_Arduino_Library

Issues

• problem with Sparkfun_Can_Demo

  #22 opened 3 years ago by groumoutisgiorgos
  0

• Leonardo compatible?

  #21 opened 3 years ago by truher
  0

• CAN transmission is working, but not the listening part

  #20 opened 3 years ago by Ipsitakoley
  0

• Message transmission using CAN transmission buffers

  #18 opened 3 years ago by sonu874
  0

• Add voltage and version ELM calls to the lib

  #16 opened 4 years ago by ranknfyle
  0

• 1Mbps Speed Supported ?!!!

  #15 opened 4 years ago by hicham-vv
  0

• Update to Modern Arduino API Standards

  #14 opened 5 years ago by oclyke
  1

• 115200 baud

  #13 opened 6 years ago by Hlorride
  0

• Will this library work with ESP32 native CAN interface?

  #11 opened 6 years ago by hondaman900
  0

• How to run at 1Mb/s?

  #10 opened 7 years ago by JunctionRunner
  0

• Does this library support CAN protocol Flow Control?

  #9 opened 7 years ago by n1705771
  0

• Add support for 29 bit identifier

  #1 opened 10 years ago by danjo133
  6

• SAMD M0 Version

  #8 opened 7 years ago by IAmOrion
  0

• add support for 1 mbps baud rate

  #2 opened 10 years ago by davided12
  2

• feature req - add flea clip and surface mount 120 ohm resistor between CANH and CANL

  #7 opened 8 years ago by webmite
  0

• No GPS reading on Arduino Uno R3

  #6 opened 8 years ago by sunekaae
  1

• lat and lon number are 10 times too large

  #5 opened 8 years ago by sunekaae
  2

• SparkFun_ECU_Demo sketch not logging GPS data.

  #4 opened 9 years ago by cmfrancis
  0