sparkfun/SparkFun_u-blox_GNSS_v3
An Arduino library which allows you to communicate seamlessly with u-blox GNSS modules using the Configuration Interface
C++NOASSERTION
Pinned issues
Issues
- 5
getPVT() returns false for long periods of time in ZED-F9P moving base application
#66 opened by jordancth - 3
Powering off using EXTINT
#63 opened by gauteh - 4
I2C held up for over 1sec
#62 opened by pitchuk - 7
- 1
- 2
Error in connecting in serial mode
#57 opened by a-3isa - 2
getModuleInfo() fails for UBX-M10050-KB
#55 opened by amnn314 - 6
- 7
- 6
UBX-NAV-SAT access
#31 opened by forstner-m - 10
Control the rate of data from NTRIP Caster
#45 opened by rekabuk - 1
- 1
- 6
NTRIP Connection dropped
#43 opened by rekabuk - 13
Data is not stored in BBR after myGNSS.powerOff() (software backup mode is not working)
#42 opened by crnicholson - 1
[Feature Request] Add support for UBX ESF-RESETALG
#35 opened by PaulZC - 4
- 7
- 3
Missing callbacks for NMEA messages
#38 opened by Benik3 - 1
Compatibility with MIA-M10
#37 opened by simon88 - 2
- 0
Clarify ESF_ALG and Example4_vehicleDynamics
#28 opened by PaulZC - 1
lastCorrectionAge in UBX-NAV-PVT is missing
#33 opened by forstner-m - 2
Receive GSA and GSV
#32 opened by forstner-m - 3
RTCM over UART
#27 opened by forstner-m - 8
SPI connection F9R ESP
#20 opened by NicoZobernig - 2
- 0
Missing return in extractConfigValueByKey
#12 opened by PaulZC - 0
setStaticPosition does not set Fixed mode
#10 opened by PaulZC - 17
ZED-F9K / ZED-F9R Priority Navigation Mode
#6 opened by shecker