Issues
- 3
OBD 1 ?
#71 opened by marianpolek - 1
getVin not getting answer
#74 opened by geetee24 - 0
how turn off check engine light?
#76 opened by geetee24 - 2
Transmission Fluid Temperature
#55 opened by MangMuang - 1
custom pid not working
#75 opened by geetee24 - 0
debug modus in OBD2UART.cpp / OBD2UART.h
#73 opened by stmb-100 - 0
Add new PIDs
#72 opened by Jastreb07 - 4
- 14
OBD-II UART Adapter V2 - Data reading issue
#50 opened by laremy - 2
- 0
Read Fuel used up
#68 opened by annak1n - 0
ESP32 without Serial1 use Serial0
#67 opened by pascaltippelt - 1
data2kml thinks I'm in the ocean?
#66 opened by julesbernard - 0
Duplicate empty CSV files?
#65 opened by julesbernard - 0
Error in adding the library of OBD 2 UART adapter
#64 opened by sanju9392 - 0
ReadPID is slow :( is there an alternative way to readPIDs that doesn't block code whilst waiting to receive the PID data?
#63 opened by IAmOrion - 1
- 0
Nano Logger Complie Error
#61 opened by stblackburn - 1
read Speed
#57 opened by cuongcoco - 0
c
#36 opened by Soomylovely - 1
Read Vehicle Odometer with OBD2UART
#58 opened by preslavmihaylov - 1
OBD-II UART Adapter V2.1 says haven't MEMS
#56 opened by ivanpajon - 2
Gear read
#51 opened by VictorCasadoZ - 5
OBD-II UART does not work
#37 opened by Mondeo - 4
How to check if the vehicle is running?
#53 opened by benjaminBrownlee - 1
How to check state of OBD connection?
#52 opened by benjaminBrownlee - 0
Error when compiling gprslogger code
#49 opened by munemo - 1
OBD II UART Adapter fails
#29 opened by milefork - 1
Bit Encoded
#45 opened by msuttonricardo - 1
DO NOT COMPILE LIBRARY
#46 opened - 0
- 0
Compile/Verify Error - Serial2
#47 opened by roblangton - 2
File does not contain valid library
#43 opened by sterlija - 0
Adding OBD library to Arduino Library Manager.
#42 opened by minyk - 1
Can't compile obd_uart_test.ino in Mac
#41 opened by drabudawood - 1
Issue Compiling
#40 opened by Sanman96 - 1
How to read DTC error codes?
#39 opened by jkissl - 0
How to use SoftwareSerial.h???
#38 opened by dbenedi2 - 2
Maintain this issue list please?
#35 opened by rubytastic - 0
Log time instead date
#31 opened by paracetamol32 - 0
With the obd2 rx/tx serial version can one ALSO use serial.print() with your library?
#30 opened by geetee24 - 2
OBD-II UART Adapter - `odb.init()` keep failing
#23 opened by jossef - 0
Support for ISO 9141-2
#27 opened by tylerjw - 2
Is it compatible with Spark Core?
#26 opened by felippenardi - 0
Is Nissan March 2014 supported?
#25 opened by felippenardi - 1
UART Adapter not working
#22 opened by azzamsaziz - 1
UART Adapter not working
#21 opened by azzamsaziz - 6
My Uart adapter v. 1.2 does not work anymore.
#20 opened by urun4fun - 0
Image frames
#17 opened by MikeMcDaniel - 0
Reading non standard CAN Bus messages
#16 opened by matinzk