Pinned issues
Issues
- 1
USE_FULL_ASSERT results in failed build due to missing stm32_assert.h
#2375 opened by PerennialNovice - 2
- 0
h503 .cfg Files to enable Debug
#2382 opened by LightningStalker - 1
- 0
- 2
`HardwareSerial::flush()` returns immediately if called as `Stream*->flush()` interface
#2369 opened by mlaga97 - 1
"blue pill" w/STMF103C8 USB-CDC Serial not reading from host
#2363 opened by bmo - 0
STM32F030F4P6 not working with stm32duino 2.0.0 or later.
#2361 opened by mcer12 - 1
Very, very, very minor doc bug
#2356 opened by Gissio - 0
- 2
Nucleo F446ZE supported since v2.7.0, but json file missing Arduino core entries under PlatformIO?
#2350 opened by pmantoine - 4
Nucleo-F439ZI support
#2324 opened by pmantoine - 0
About the application of DMA&ADC joint function of STM32 developed by CubeIDE on ArduinoIDE
#2343 opened by CJT1111 - 3
STM32F030CCT6 InputCapture Problem
#2339 opened by xiezhoubin - 4
STM32F030CCT6 PB15 GPIO Interrupt
#2338 opened by xiezhoubin - 2
Is the STM32F030CCT6 chip supported?
#2337 opened by xiezhoubin - 0
Low power timers are missing in PeripheralPins.c
#2330 opened by PerennialNovice - 0
I2S on STM32F401
#2328 opened by 0x0fe - 4
STM32F103 RTC BKP Registers 16bit not 32bit
#2325 opened by RedEchidnaUK - 1
IPAddress is missing the toString function interface?
#2303 opened by VirensCn - 2
Servo.attach() call to Servo::write() before min/max are configured leads to issue when writting angles in degrees
#2308 opened by jan019 - 2
Error: 13 INTERNAL: Library install failed: moving extracted archive to destination dir: library not valid
#2317 opened by Alectronics - 2
nucleo_h753zi does not output data from a serial port that connected to stlink
#2314 opened by asukiaaa - 8
While debugging, cannot access registers
#2312 opened by PerennialNovice - 3
on debug, variable gets optimized out
#2313 opened by PerennialNovice - 2
- 11
- 1
SystemClock_Config(void) unexpected behavior
#2299 opened by AirchipTeknoloji - 7
- 0
STM32 boards fail to install in Arduino IDE
#2289 opened by mromine3 - 0
WeAct STM32G431CBU6
#2285 opened by ITstreet1 - 3
cannot debug with openOCD in sloeber/eclipse
#2280 opened by PerennialNovice - 3
Can't re-define ISR handler for interrupts/exceptions defined as weak in startup_stm32f103x6.s
#2281 opened by mha1 - 3
Unable to use debug function in Arduino IDE 2.3.0
#2277 opened by China-Mr-Hou - 0
Need support to generate .srec files using "Export Compiled Binaries" option
#2274 opened by abhaysbharadwaj - 0
LIS2DH12TR
#2272 opened by 0x0fe - 1
Board selection menu too long
#2271 opened by tszaboo - 0
Compatibility with Visual Micro
#2269 opened by AlexandrJet - 0
Document New Board Addition
#2264 opened by anjomro - 1
WS2812 not working how to solve??
#2261 opened by Allen1080211 - 1
STM32 Blue Pill (STM32F103C8)
#2257 opened by WeiKangLim24 - 5
- 1
STM32 Cube Programmer - required installation
#2252 opened by slavendam - 6
Linker error with version 2.7.1 for STM32 Nucleo F446RE
#2244 opened by npalix - 5
USB CDC Serial loses data when sending too quickly
#2243 opened by ondras12345 - 0
Analog comparator with timer function
#2245 opened by codev123 - 0
build error during archiver, filename mixed with path without slashes
#2241 opened by PerennialNovice - 2
USB CDC breaks application with STM32L4P5
#2237 opened by maribeiro - 0
stm32 fast adc sampling rate
#2233 opened by codev123 - 0
STM32F103 I2C stuck
#2231 opened by arozhkov2001